Bedienungsanleitung Severin HT 0770 (Seite 10 von 46) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712576

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

disposed of through local special garbage

collection points.

Always remove the batteries during extended

periods of non-use. This will help to prevent

damage to the appliance caused by leaking

batteries.

Operation

Remove the protective cover.

Use the On/Off switch to turn the appliance

on.

Start shaving the desired skin areas.

Use the On/Off switch to turn the appliance

off after use.

Replace the protective cover on the shaving

head after every use.

Shaping head

The shaping head allows for precise

shaping of the beard:

Use the ribbed area to slide out the shaping

head until it is heard locking into place.

Start shaping the beard exactly as desired.

Slide the shaping head back to its former

position.

A few remarks on shaving

We recommend shaving before washing or

taking a shower, as the skin will swell

slightly after washing.

Move the shaving head at right angles to

the skin against the natural growth of the

beard, while tightening the skin with your

fingers.

Cleaning and care

■ Switch off the appliance and remove the

batteries before cleaning.

■ For safety reasons, the appliance must not

be immersed in nor allowed to come into

contact with liquid. The housing may be

wiped with a slightly damp cloth.

■ Do not use abrasives or harsh cleaning

solutions.

Shaving head

After use, remove hair residue from the

blade unit with the cleaning brush. To

remove the head, grip it on both sides and

pull off.

Caution! The blade unit is extremely

sharp! There is a risk of injury.

The shaving foil should only be cleaned by

gently tapping it. Do not use the cleaning

brush.

The blade unit is subject to wear and must

be replaced if it shows signs of over-usage.

Put the protective cover on the shaving

head when not in use.

Shaping head

Slide out the shaping head and clean it with

the cleaning brush.

Caution! The shaping head is extremely

sharp! There is a risk of injury.

Before use, and also after the appliance

has been used for approx. 15 minutes, put

a drop of acid-free oil between the trimming

comb and the trimming blade of the

shaping head, and then switch the

appliance on briefly to ensure that the oil is

evenly distributed. Regular oiling guarantees

good cutting performance over a long

period and thus a long service life.

Disposal

Do not dispose of old or defective

appliances in domestic garbage; this

should only be done through public

collection points.

Guarantee

This product is guaranteed against defects in

materials and workmanship for a period of two

years from the date of purchase. Under this

guarantee the manufacturer undertakes to

repair or replace any parts found to be

defective, providing the product is returned to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin HT 0770 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info