Bedienungsanleitung Severin HT 6014 (Seite 7 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712587

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Hair dryer

Dear Customer

Before using the appliance, the user must

read the following instructions carefully.

Connection to the mains supply

 e hair dryer should only be connected to

an earthed socket installed in accordance

with the regulations.

Make sure that the supply voltage corresponds

with the voltage marked on the rating label of

the hair dryer.

 is product complies with all binding CE

labelling directives.

Familiarisation

1. Air intake grille

2. Air  ow control

3. Air temperature control

4. Hanging loop

5. Power cord with plug

6. Cool function

7. Styling nozzle

8. Air outlet opening

Dryer models with volume di usor and

IONIC function

9. Indicator light

10. Volume di usor

Important safety instructions

Caution: z do not use the

appliance in the vicinity of a

bath, shower or swimming-

pool, over a washbasin  lled

with water or near any other receptacle

containing water.

Protect the appliance from moisture and

splashing water and do not operate it with

wet hands.

In the vicinity of any water source, there z

is a risk even when the appliance is

switched o .  erefore, always remove

the plug from the wall socket a er use,

especially if the appliance is being used in

a bathroom.

Additional protection is available by  tting

an earth-leakage circuit-breaker with

a rated tripping current not exceeding

30mA into your bathroom installation.

Please consult a quali ed electrician.

Electric heating appliances operate at very z

high temperatures. Do not touch any part

of the appliance except the grip. Otherwise

there is a real risk of burning.

Do not use the appliance on synthetic hair- z

pieces or wigs, as the heat emitted might

cause damage to the synthetic  bres.

Make sure the air intake and outlet z

openings are not blocked (e.g. by  ngers or

hair), and that no  u or  bre particles are

allowed to accumulate in the air intake.

A blockage in the air- ow system may

cause the integral thermal safety cut-

out to switch o the appliance. Should

this occur, immediately disconnect the

appliance from the mains power and allow

su cient time for it to cool down before

the blockage is removed and the appliance

is switched on again.

Before the appliance is used, the main z

body as well as any attachments  tted

should be checked thoroughly for any

defects. If the appliance, for instance, has

been dropped onto a hard surface, it must

no longer be used: even invisible damage

may have adverse e ects on its operational

safety.

 e power cord should be regularly z

examined for any signs of damage. In the

event of such damage being found, the

appliance must no longer be used.

Do not operate the appliance if excessive z

force has been used to pull the power

cord. Damage cannot always be detected

from the outside; the entire unit should

therefore be checked by a quali ed

technician before it is used again.

To prevent damage to the power cord, z

do not bend or kink the cable, especially -

where it leaves the housing,

do not pull on the cord, -

do not coil the power cord around the -



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin HT 6014 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info