Bedienungsanleitung Severin KA 4820 (Seite 14 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712610

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

142 x 208 mm

Before using for the rst time

∙ Unpack the appliance completely and

remove all packaging materials and

stickers.

∙ Clean the jug and lter insert as

described in the section Cleaning and

care.

∙ Before making coffee for the rst time,

let the appliance go through two or

three ltration cycles using the indicated

maximum amount of cold water, but

without using ground coffee.

∙ This should also be done if the appliance

has not been used for an extended

period of time, and after descaling.

Automatic switch-off

To save energy, the appliance (including

the hot-plate) will switch itself off

automatically about 35 minutes after the

brewing cycle is complete.

Power-cord storage compartment

The integrated power-cord storage

compartment at the rear is used for storing

the power cord.

The recess at the bottom facilitates limiting

the length of the power cord.

Making coffee - general information

∙ The measuring scales on the water

container and glass jug help measuring

the correct amount of clean water. The

left scales are used for standard-sized

cups of approx.125ml, the right scales

for smaller cups.

∙ Make sure that the indicated maximum

amount of water or number of cups is not

exceeded.

∙ If several consecutive brewing cycles

are required, switch off the coffee maker

after each cycle and let the appliance

cool down for approx. 5 minutes.

∙ Caution: When lling the appliance

with fresh water shortly after a brewing

cycle is completed, there is a danger

of scalding from hot water or steam

escaping through the water outlet.

Making coffee

1. Fillingwithwater:

Open the water container and ll it with the

desired quantity of water, then close the lid.

2. Preparingthejug:

Replace the lid on the jug, and then place

it in the appliance. If correctly inserted, the

lid will disable the drip-stop mechanism in

the lter holder during the brewing cycle.

3. Insertingthepaperlter:

Open the swing-out lter sideways and

insert a size-4 paper lter into the lter

holder, rst folding down the perforated

sides of the lter.

4. Fillingwithgroundcoffee:

For each regular-sized cup (125ml), a

measure of about 6 g (= 1½ - 2 teaspoons)

of medium or nely ground coffee will

be required. Close the swing-out lter

afterwards.

5. Connectingtheappliance:

Insert the power plug.

6. Startingthebrewingcycle:

Use the

button to switch the coffee

maker on. The ltration cycle starts and the

water passes through the lter.

7. Removingthejug:

Wait until all the water has passed through;

the jug can now be removed.

8. Keepingthecoffeewarm:

The coffee may be kept warm in the jug by

leaving it standing on the hot-plate, which

remains hot for about 35 minutes after

brewing is complete.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KA 4820 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info