Bedienungsanleitung Severin KA5703 (Seite 13 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

712353

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

capacity, it will take about 5 minutes to

heat the water.

∙ Once the perfect brewing temperature

has been reached the valve inside the

water reservoir opens and the brewing

cycle begins.

∙ The water reservoir element will switch

off automatically and the pilot light on the

right-hand side will go out.

∙ The water starts to ﬂ ow through the ﬁ lter

holder into the glass jug (9). The ﬁ ltering

process is complete when the total

amount of water has passed through and

no water is left in the ﬁ lter holder.

∙ To interrupt the brewing cycle, press the

On/Off button again to turn the appliance

off.

∙ When removing the glass jug (9) from

the machine once the ﬁ ltering process is

complete, the non-drip valve of the ﬁ lter

holder will close and prevent coffee from

dripping onto the hotplate of the machine.

∙ Remove the glass jug from the appliance.

∙ To keep remaining coffee hot, replace the

glass jug (9) back onto the hotplate (10).

∙ The plate is kept hot for around 35

minutes after brewing is complete.

However, it may be turned off by pressing

the on-off button again to switch the

appliance off.

∙ If the hot-plate is switched on only after

the water is heated, it will automatically

switch off after around 40 minutes.

∙ The plastic ﬁ lter can be removed for

cleaning (illustration V).

∙ Should you wish to start several brewing

cycles one after the other, allow the

machine to cool down for at least 5

minutes with the reservoir lid open before

re-using it. Use cold water only to reﬁ ll

the water reservoir.

Warning! Remember that the water

reservoir and the reservoir lid are still hot

after the brewing cycle has been completed

and hot steam may escape from the

reservoir when opening the lid (danger of

scalding)!

Cable storage

The cable storage space serves for storing

the cable and for the limitation of its length

(illustration VI).

Cleaning and care

∙ Before cleaning your coffee maker,

always make sure that the plug has been

removed from the mains supply socket.

∙ For safety reasons the coffee maker

should not be treated with water or liquids

and should never be immersed.

∙ Wipe the body of the machine with a

clean damp cloth and dry afterwards. To

prevent the valve of the water reservoir

from getting clogged, use a non-ﬂ uffy

cloth to clean the water reservoir and the

glass jug.

∙ Do not use harsh abrasive cleaners.

∙ The glass jug (9), its lid (8), the ﬁ lter lid (5)

and the plastic ﬁ lter (6) may be cleaned in

hot soapy water or in the dishwasher.

Descaling

∙ In order to maintain the excellent quality

of your cof

fee maker, we recommend

you to descale the machine at regular

intervals.

∙ Any warranty claim will be null and

void if the appliance malfunctions

because of insuf

ﬁ cient descaling.

∙ Descaling is needed when

∙ the brewing cycle takes longer than

normal,

∙ there is build-up of deposits inside the

water reservoir or on the valve unity,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KA5703 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info