Bedienungsanleitung Severin KM 3890 (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712661

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

the appliance has been switched off

and disconnected from the mains.

∙ Caution: After switching off, always

wait until the motor has come to a

complete standstill. Do not touch any

moving parts.

∙ Press the release button (PUSH) to

release the drive head. Tilt the head

upwards until it is heard locking safely

into place.

∙ Fit the main bowl and lock it by turning it

clockwise.

∙ Place the splash-guard ring onto the bowl

with the ﬁ ller opening to the left.

∙ When ﬁ tting the attachments, ensure that

the pin on the mounting ﬁ ts safely into the

corresponding recess in the attachment.

∙ Push the attachment all the way up, then

lock it by turning it anti-clockwise (about

90°).

∙ Caution: If an attachment should touch

the splash-guard ring when being ﬁ tted,

lower the tilt-arm again and switch the unit

brieﬂ y on; this will bring the drive head in a

centred position inside the bowl.

∙ Put the ingredients into the bowl.

∙ Press the release button. Tilt the head

downwards until it is heard locking into

place.

∙ Insert the plug into a wall outlet.

∙ Slowly turn the rotary control to the

required speed setting.

∙ The ﬁ ller opening in the splash-guard

ring allows you to add further ingredients

during the stirring or kneading process.

∙ Switch the appliance off and remove the

plug from the wall outlet after use,

∙ Press the release button (PUSH) to

release the drive head. Tilt the head

upwards until it is heard locking safely into

place.

∙ Caution: Check the position of the

attachments before tilting up the drive

head: if they are not in a centred position,

brieﬂ y switch the unit on again to centre

the drive head inside the bowl.

∙ Push the attachment upwards all the

way, then unlock it by turning it clockwise

(about 90°) and remove it from its

mounting.

∙ Remove the splash-guard ring.

∙ Unlock the bowl by turning it anti-

clockwise and remove it.

Using the blender

Caution: When using the blender

attachment, both the main bowl and

splash-guard ring must be ﬁ tted. Do not

reach into the stirring bowl with your

hands or ﬁ ngers

Appropriate speed levels

∙ Settings 1 to 4 are suitable for slow

blending and stirring.

∙ Settings 5-6 are suitable for chopping,

mixing and pureeing.

Blender operation

∙ Fit the blender jug in such a way that the

arrow mark on the jug is properly aligned

with the open-lock symbol (

). Lock the

jug by turning it clockwise, so that the

arrow mark on the jug is aligned with the

closed-lock symbol ( ).

∙ Put the liquid ingredients into the blender

jug, which has a maximum capacity of

around 1,500 ml. To prevent possible

spillage when processing foamable or thin

liquids such as milk, do not ﬁ ll the jug over

the 1,000 ml mark.

∙ Place the lid on the jug so that the pouring

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KM 3890 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info