Bedienungsanleitung Severin KM 3892 (Seite 11 von 58) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

761722

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

142 x 208 mm

General

∙First, assemble the accessories needed for the task you

wish to undertake. Instructions for selecting accessories

are provided in the table at the beginning of the manual.

∙The food processor is equipped with two safety

switches. This means that the appliance can only be

switched on when the appropriate accessories are

attached and correctly locked in place.

∙After every use, switch off the appliance and wait for the

motor to stop before changing or removing accessories.

∙Never ll higher than the Max markings for quantities

in the working container, mixing jug and grinding

attachment container, and apply the information

provided in the table at the beginning of the manual.

∙The maximum operating times for each application are

provided in the table at the beginning of the manual.

∙The appliance is equipped with an overheating

protection, which turns it off in the event of overheating.

If this happens, switch off the appliance, unplug the

power cord and wait for 30 minutes, until the appliance

has cooled down again.

A) Chopping

∙Place the working container onto the motor unit, with the

handle to the right, and turn it clockwise until it locks into

place with a click ( → ).

∙Place the drive shaft into the working container.

∙Place the chopping tool onto the drive shaft and press

down as far as it will go.

Attention: Only touch the plastic parts of the chopping

tool. The blades are very sharp!

∙Add your ingredients.

∙Place the lid with the food pusher onto the working

container and turn it clockwise until it locks into place

with a click ( → ).

∙Plug in and turn on the appliance.

∙If you need to add more ingredients, remove the food

pusher briey to do so.

B) Kneading

∙Place the working container onto the motor unit, with the

handle to the right, and turn it clockwise until it locks into

place with a click ( → ).

∙Place the drive shaft into the working container.

∙Place the kneading tool onto the drive shaft and press

down as far as it will go.

∙Add your ingredients.

∙Place the lid with the food pusher onto the working

container and turn it clockwise until it locks into place

with a click ( → ).

∙Plug in and turn on the appliance.

∙If you need to add more ingredients, remove the food

pusher briey to do so.

C) Grating, shredding, slicing & Julienne cutting

∙First select the desired working disc. Each disc has

different functions on each side.

Disc Function

F1 Julienne cutting

F2 Coarse grating

P1 Slicing

P2 Medium grating

R1 Shredding

R2 Fine grating

The name of each disc can be found on the black plastic

holder in the centre.

∙Place the working container onto the motor unit, with the

handle to the right, and turn it clockwise until it locks into

place with a click ( → ).

∙Place the drive shaft into the working container.

∙Place the selected disc onto the drive shaft with the

desired function facing upwards.

∙Place the lid onto the working container and turn

clockwise to lock ( → ).

∙Plug in and turn on the appliance.

∙Add ingredients by means of the feed tube.

Attention! Always use the appropriate food pusher

when adding ingredients by means of the feed tube.

D) Whipping cream & beating egg whites/Emulsifying/

Preparing dressings

∙Place the working container onto the motor unit, with the

handle to the right, and turn it clockwise until it locks into

place with a click ( → ).

∙Place the drive shaft into the working container.

∙Place the emulsifying disc onto the drive shaft.

∙Add your ingredients.

∙Place the lid onto the working container and turn

clockwise to lock ( → ). Place the food pusher into

the feed tube.

∙Plug in and turn on the appliance.

∙If you need to add more ingredients, remove the food

pusher briey to do so.

E) Mixing

∙Place the mixing jug onto the motor unit and turn it

clockwise until it locks into place with a click ( → ).

∙Add the ingredients, put the mixing jug lid on and turn

clockwise to lock ( → ).

∙Insert the lid insert into the feed opening in the lid and

turn clockwise to lock ( → ). Never operate the

appliance without lid insert!

∙Plug in and turn on the appliance.

∙Attention: Never operate the mixer without any

ingredients in the container!

∙Never put hot liquids into the container!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KM 3892 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info