Bedienungsanleitung Severin KP 1031 (Seite 13 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712676

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Power

Press the operating key . The display

shows the default setting, 5 (left cooking

plate: 4). Using the + and – selection keys,

the power setting can be adjusted from 1 to

10 as required (left plate from 1-7, right plate

from 1-10).

Temperature

Press the operating key

. The display

shows the default setting, 120. Using

the + and –selection keys, the required

temperature level can be selected in steps of

20 °C within a range from 60 °C to 240 °C.

Timer

The timer function allows for setting the

intended cooking time. Once the desired

function has been selected, press the

operating key , and then use the + and

– selection keys to select the cooking time.

Every press of the + key increases the

cooking time by 5-minute intervals, while

pressing the – key reduces the cooking time

by 1 minute. The maximum timer setting is

180 minutes. Once the pre-programmed time

has elapsed, a beep signal is heard and the

appliance goes into stand-by mode.

If no timer setting is selected, cooking can

only be interrupted by pressing the On/

Stand-by switch.

Do not leave the appliance unattended while

in use.

Function indicators

The function indicator shows which of the

‘Power’, ‘Temperature’ or ‘Timer’ functions

has been selected.

Automatic recognition of suitable

cookware

The appliance detects whether any

cookware has been placed on the plate,

and whether it is suitable for this appliance.

If any function is selected with non-suitable

cookware on the plate, a number of beeps

will be heard, and the display will show the

error message ---. After four beeps, the

appliance goes into stand-by mode.

Residual heat indicator

In standby mode, any residual heat in the

plate(s) is indicated on the display. If the

temperature is below approx. 50 ° C, the

indicator L shows in the display. For a

residual heat exceeding approx. 50 ° C, the

display shows H.

Operation

∙ Connect the unit to mains power.

∙ A beep signal is heard. The appliance is

now in stand-by mode.

∙ The display shows the indicator L for low

residual heat in the plate(s).

∙ Put the food into the pot or pan and put it

on the cooking surface.

∙ Use the On/Stand-by switch to turn

the appliance on. A beep signal is heard

and the function indicators for ‘Power’ and

‘Temperature’ starts ﬂ ashing.

∙ If no input is registered within 30 seconds

of switching on, the appliance returns into

stand-by mode.

∙ Use the or operating keys to select

the required function.

∙ The appliance starts the heating process.

∙ Use the + and – selection keys to select

the desired power setting or temperature

level.

∙ If so desired, use the timer function to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KP 1031 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info