Bedienungsanleitung Severin KP 1070 (Seite 13 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712678

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Temperature

Press the operating key . The display

shows the default setting, 120. Using

the + and –selection keys, the required

temperature level can be selected in steps of

20 °C within a range from 60 °C to 240 °C.

Timer

The timer function allows for setting the

intended cooking time. Once the desired

function has been selected, press the

operating key

, and then use the + and

– selection keys to select the cooking time.

Every press of the + key increases the

cooking time by 5-minute intervals, while

pressing the – key reduces the cooking time

by 1 minute. The maximum timer setting is

180 minutes. Once the pre-programmed time

has elapsed, a beep signal is heard and the

appliance goes into stand-by mode.

If no timer setting is selected, cooking can

only be interrupted by pressing the On/Off

switch.

Do not leave the appliance unattended while

in use.

Function indicator

The function indicator shows which of the

‘Power’, ‘Temperature’ or ‘Timer’ functions

has been selected.

Automatic recognition of suitable

cookware

The appliance detects whether any

cookware has been placed on the plate,

and whether it is suitable for this appliance.

If any function is selected with non-suitable

cookware on the plate, a number of beeps

will be heard, and the display will show the

error message ---. After ﬁ ve beeps, the

appliance goes into stand-by mode.

Residual heat indicator

In standby mode, any residual heat in

the plate(s) is indicated on the display. If

the temperature is below approx. 50 ° C,

the indicator L shows in the display. For a

residual heat exceeding approx. 50 ° C, the

display shows H.

Operation

∙ Connect the unit to mains power.

∙ A beep signal is heard. The appliance is

now in stand-by mode.

∙ The display shows the indicator L for low

residual heat in the plate(s).

∙ Put the food into the pot or pan and put it

on the cooking surface.

∙ Use the On/Off switch to turn the

appliance on. A beep signal is heard and

the function indicators for ‘Power’ and

‘Temperature’ starts ﬂ ashing.

∙ If no input is registered within 30 seconds

of switching on, the appliance returns into

stand-by mode.

∙ Use the or operating keys to select

the required function.

∙ The appliance starts the heating process.

∙ Use the + and – selection keys to select

the desired power setting or temperature

level.

∙ If so desired, use the timer function to

select the cooking time.

∙ Once cooking is ﬁ nished, switch the

appliance off and disconnect in from the

mains.

General care and cleaning

∙ Before cleaning the appliance, ensure it is

disconnected from the power supply and

has cooled down completely.

∙ To avoid the risk of electric shock, do not

clean the appliance with water and do not

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin KP 1070 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info