Bedienungsanleitung Severin MW7877 (Seite 23 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

573407

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

6. Turn the rotary control until the display shows 20:00.

7. Press the rotary control to start the cooking process.

Note: The cooking time can only be set once the selected temperature has been reached, and the food has been placed inside the

oven compartment.

Note: Steps 2-3 can be omitted, if pre-heating is not required.

Microwave/hot-air combination programmes

For this combination, four programme settings are available.

Hot-air temperature: 110°C

140°C

170°C

200°C

The cooking time can be pre-set to a maximum of 95 minutes.

Example: to programme the unit for a cooking time of 28 minutes at a temperature of 170°C.

1. Press repeatedly until the display shows 170°C.

2. Turn the rotary control

until the display shows 28:00.

3. Press the rotary control to start the cooking process.

Setting multiple programmes

Prior to operation, the microwave can be set for up to 3 programmes to run consecutively, e.g. defrosting ﬁ rst, followed by the

microwave and then the hot-air function. The multiple-programme feature can be used with any of the microwave, grill and hot-air

functions.

Example: using the defrost function ﬁ rst, followed by the microwave and then the hot-air function.

1. Use the

button to select a reduced microwave setting for defrosting.

2. Turn the rotary control

to select the required defrosting time.

3. Use the

button to select a high microwave setting.

4. Turn the rotary control

to select the required microwave cooking time.

5. Use the

button to select the required hot-air temperature.

6. Turn the rotary control

to select the required hot-air cooking time

7. Press the rotary control to start the multiple programme selection.

Note: The automatic cooking programmes and the quick-programme are not suitable for multiple programming.

If multiple programmes are set, the indicator is shown in the display.

Hint: This memory function is especially helpful when using the microwave to cook food at different power settings. While a higher

power setting is selected initially, the power can be reduced at a later stage in order to keep the food hot, and to ensure that

the heat is evenly distributed when the food is already done.

Defrost programme:

This programme is useful for defrosting food by setting the defrosting time.

The defrosting time can be pre-set to a maximum of 45 minutes.

Example: to programme the unit for a defrosting time of 5 minutes.

1. Turn the rotary control anti-clockwise until the display shows 9.

2. Press to conﬁ rm the programme selection.

3. Turn the rotary control until the display shows 5:00.

4. Press the rotary control to start the defrost programme.

Helpful notes:

∙ Four beep signals indicate that 2/3 of the programmed defrosting time has elapsed. Turn the food over, taking out any that is

already defrosted. Press the rotary control to continue the programme.

∙ Should the food not be completely defrosted after the pre-set defrosting time has elapsed, it is advisable to limit any further

defrosting times to 1-minute periods until the food is fully defrosted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin MW7877 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Severin MW7877

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info