Bedienungsanleitung Severin PG 2472 (Seite 13 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

713195

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

pan.

∙ Fit the grill plate on top.

∙ If required, additional accessories may be

ﬁ tted according to the diagram.

∙ Fill the grill pan with water up to the ‘Max’

marking.

∙ Insert the plug into a suitable earthed

power-outlet.

∙ Let the grill heat up for approximately

10 minutes without any food on the grill

plate. This will lessen the smell typically

encountered when ﬁ rst switching on a

new grill (a slight smell and a little smoke

may be emitted).

Grilling

∙ The grill pan must be ﬁ lled with water up

to the ‘Max’ marking.

∙ Fit the heating element; then ensure that

the grill plate is placed correctly onto the

element.

∙ Insert the plug into a suitable earthed

power-outlet.

∙ Turn the thermostat control knob

clockwise all the way. The indicator light

comes on, and the heating element is

permanently switched on.

∙ After approximately 10 minutes, the heating

element reaches the right temperature for

grilling.

∙ The grill can also be used to keep the

food warm: by turning the thermostat

control back, the intervals between the

heating element switching on and off can

be reduced to a minimum.

∙ Caution: to prevent a possible build-

up of heat and subsequent damage to

the appliance, the food to be cooked

must be placed directly onto the grill

plate. Do not place any objects (e.g.

aluminium foil, barbecue plates or

other items) between the food and the

heating element.

∙ As the water in the grill pan evaporates

during grilling, it must be topped up in

good time. When adding water, ensure

that the water does not come into contact

with the heating element. Caution:

disconnect the grill from the mains before

adding water. If your grill plate comes with

a ﬁ ller opening, the water must be poured

through the opening.

∙ Once the grilling process is ﬁ nished:

∙ Set the thermostat control knob back to

''.

∙ Remove the plug from the power outlet

and allow the grill to cool down.

General care and cleaning

∙ Ensure that the grill is thoroughly cleaned

after use.

∙ Before cleaning the grill, ensure it is

disconnected from the power supply and

has completely cooled down.

∙ Do not use metallic pads or abrasive

cleaning agents.

∙ Remove the grill plate and clean it with

warm soapy water. T

o remove persistent

food residues, it can be left soaking for

a while.

∙ The heating element can be removed

for cleaning. To avoid the risk of electric

shock, do not clean the heating element

with water and do not immerse it in water.

The junction box may be wiped with a

slightly damp lint-free cloth.

∙ All other parts can be cleaned with a cloth

soaked in soapy water, and should be

wiped completely dry afterwards.

Disposal

Devices marked with this symbol must

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin PG 2472 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info