Bedienungsanleitung Severin PG 8137 (Seite 13 von 68) (Alle Sprachen)

799267

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

142 x 208 mm

Rotary control - light ring

The light ring indicates the current operating mode:

No light:

The unit is in sleep mode.

Blue light:

The unit is in stand-by mode.

Flashing:

The grill rack has not yet reached the selected temperature.

The unit is heating up or cooling down.

Steady:

The selected temperature has been reached.

Orange:

Grilling at 80-320 °C

Red:

Boost-zone 330-500 °C

Timer

The timer is used to monitor the grilling time. It can be set

from 1 min to 23 h 59 mins. Beep signals indicate that the

running time has elapsed; the heating element remains

switched on.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

hours.

∙Presstherotarycontrolbrieyandadjusttheminutes.

∙Conrmthetimesettingbybrieypressingthecontrol.

Thecolonstartsashing;oncethetimehaselapsed,

beep signals are heard.

∙ To return to stand-by mode, press the rotary control for

two seconds.

∙ Alternatively, set the timer to 0:00, and press the control

brieytoreturntostand-bymode.

∙ If the heating is switched off after the timer is set, the

appliance will change to sleep-mode 5 minutes after the

last input, i.e. the timer is switched off.

∙ If the timer is set with the heating already off, it will

continue until the pre-selected time is reached, when the

unit changes to sleep-mode.

Grilling at 80-320 °C

Togrillsausages,poultry,shetc.Fornishingorkeeping

warm steaks.

The entire grill surface is heated.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingorangeandtheapplianceis

heating up.

∙ Once the selected temperature has been reached, the

ring shows steady orange.

∙ Place the food on the grill surface.

∙Close the cover, if desired.

‘Boost-zone’ grilling 330-500 °C

For searing or light grilling of steaks.

The boost-zone is located to the right; the left side is

heated to 320 °C.

∙ Turn the rotary control until lights up.

∙Presstherotarycontrolbrieyandturntoselectthe

desiredtemperature.Pressbrieytoconrm.

∙Theringstartsashingredandtheapplianceisheating

up.

∙ Once the selected temperature has been reached, the

ring shows steady red.

∙ Place the food on the boost-zone.

Note:

Do not close the cover during Boost-zone grilling. The

Boost-zone function is automatically de-activated when

the cover is closed.

∙ For subsequent cooking, lower the temperature or shift

the food to the left on the grill surface.

Grilling with the core thermometer

∙Scope of supply: 1 piece

Other core thermometers are available under item no.

8126.

∙ Caution: The core thermometers heat up during use.

Usesuitableprotection,egbarbecuegloves.

∙Fit the thermometer plugs into the sockets at the lower

left of the junction box . To prevent the appliance from

switching off, ensure that the box is not lifted up and

stays properly connected.

∙ Select the desired grill function and temperature.

∙ Once pre-heating is complete and the ring shows a

steady light, put on the food.

∙ Push the tips of the thermometers into the centre of the

food.

∙Usetherotarycontroltosetthedesiredcore

temperature or .Pressbrieytoconrm.

∙ The display shows the respective current core

temperature.

∙When using the cover during grilling, the core-

thermometer cables should be routed through the cable

leads on either side of the cover (see diagram 9).

∙ Once the pre-set core temperature on one thermometer

is reached, three long beep signals are heard.

∙ Remove the respective thermometer and take off the

food.

Note:

The grill plate remains on even after the pre-set core

temperature has been reached.

Stand-by mode

∙ To switch off the heating and return to stand-by mode,

press the rotary control for two seconds.

∙Alternatively,pressthecontrolbriey,setthe

temperature to 00andpressagainbrieytoreturnto

stand-by mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin PG 8137 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info