Bedienungsanleitung Severin PG 8534 (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

654745

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

it might be subjected to extremes of

temperature or high humidity.

∙ No responsibility is accepted if damage

results from improper use, or if these

instructions are not complied with.

∙ This barbecue grill is intended for

domestic use only and not for commercial

applications.

∙ In order to comply with safety regulations

and to avoid hazards, repairs of

electrical appliances must be carried

out by qualiﬁ ed personnel, including the

replacement of the power cord. If repairs

are needed, please send the appliance to

one of our customer service departments.

The address can be found in the appendix

to this manual.

∙ This product complies with all binding CE

labelling directives.

Heating element

The junction box contains a safety switch.

Place the heating element into the grill pan.

The safety switch is activated automatically

when the heating element has been properly

ﬁ tted. If not ﬁ tted correctly, the appliance can

not be switched on.

Before using for the ﬁ rst time

∙ Remove any packaging materials from

the appliance.

∙ Clean the grill plate/rack and grill pan with

warm soapy water.

∙ Grill assembly:

∙ Place the heating element into the grill

pan.

∙ Fit the grill plate/rack on top.

∙ If required, additional accessories may be

ﬁ tted according to the diagram.

∙ Fill the grill pan with water up to the ‘Max’

marking.

∙ Insert the plug into a suitable earthed

power-outlet.

∙ Let the grill heat up for approximately 10

minutes without any food on the grill. This

will lessen the smell typically encountered

when ﬁ rst switching on a new grill (a slight

smell and a little smoke may be emitted).

Grilling

∙ The grill pan must be ﬁ lled with water up

to the ‘Max’ marking.

∙ Fit the heating element; then ensure that

the grill plate is placed correctly onto the

element.

∙ Insert the plug into a suitable earthed

power-outlet.

∙ Turn the thermostat control knob

clockwise all the way. The indicator light

comes on, and the heating element is

permanently switched on.

∙ After approximately 10 minutes, the heating

element reaches the right temperature for

grilling.

∙ The grill can also be used to keep the

food warm: by turning the thermostat

control back, the intervals between the

heating element switching on and off can

be reduced to a minimum.

∙ Caution: To prevent a possible build-

up of heat and subsequent damage to

the appliance, the food to be cooked

must be placed directly onto the grill

plate/rack. Do not place any objects

(e.g. aluminium foil, barbecue plates or

other items) between the food and the

heating element.

∙ As the water in the grill pan evaporates

during grilling, it must be topped up in

good time. When adding water, ensure

that the water does not come into contact

with the heating element. Caution:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin PG 8534 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info