Bedienungsanleitung Severin SM 3707 (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712882

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Safety switch

A special safety switch in the motor housing

ensures that the appliance can only be

operated if the blender jug is properly locked

in position.

Before removing the blender jug, make

sure that the rotary control is in position 0.

This also applies when ﬁ tting the blender

jug to the motor housing. If the control is

not in its off-position (0), the motor will start

immediately.

Operation

∙ Fit the blender jug to motor housing, with

its handle to the right, in such a way that

the two triangle symbols are aligned.

∙ Put the ingredients into the blender jug.

The jug has a maximum capacity of 1500

ml. To avoid possible foaming or spilling

when processing foamable or thin liquids

such as milk, do not ﬁ ll the jug over the

1000 ml mark.

∙ Replace the lid and turn clockwise until it

is heard locking into place.

∙ Insert the stopper into the lid.

∙ To add ingredients during operation, the

stopper in the centre of the lid can be

removed.

∙ Caution: Do not operate when the

blender jug is empty. Do not ﬁ ll it with dry

items only, such as nuts, almonds etc.

∙ Insert the plug into the wall outlet and use

the rotary control to select the required

power setting.

∙ After using the blender, switch off and

remove the plug from the wall socket.

Wait until the motor has come to a

complete standstill before removing the

blender jug.

Crushing ice

Ice-cubes can be easily crushed in the

blender jug:

Fill the jug a quarter full with ice cubes, and

then ﬁ t it to the motor housing, as described

in the section Operation. Put on the lid with

the stopper in place, and use the pulse

function (P) to operate the appliance for

about 2 seconds. Wait until the ice cubes

have collected in the bottom of the jug again

and then repeat the process, until the cubes

have been reduced to the required size.

Cleaning and care

∙ Always remove the plug from the wall

socket before cleaning the appliance.

∙ To avoid the risk of electric shock, do not

clean the motor housing or the power

cord with water and do not immerse them

in water. The motor housing may be

wiped with a slightly damp, lint-free cloth.

∙ Do not use abrasives, harsh cleaning

solutions or hard brushes for cleaning.

∙ For cleaning directly after use, ﬁ ll the

blender jug with around 1000 ml of

warm water and a little detergent. Let

the appliance run for a short period

as described in the section Operation.

Afterwards, rinse the blender jug, lid and

stopper with fresh water. All parts must

me thoroughly dried afterwards.

∙ These parts are not dishwasher-safe.

∙ If required, the blade unit for the blender

jar can be detached for cleaning (see

diagram):

∙ Turn the blender jug upside down and

take off the black blade unit by turning it

anti-clockwise. Caution: The blades are

extremely sharp.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin SM 3707 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info