Bedienungsanleitung Severin SM 3734 (Seite 13 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

654714

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

completely covered.

∙ Insert the stopper into the lid.

∙ To add ingredients during operation, the

stopper in the centre of the lid can be

removed.

∙ Do not put any objects into the blender

jug while the appliance is operating.

∙ Insert the plug into the wall outlet and use

the rotary control to select the required

power setting.

∙ Caution: Do not operate when the

blender jug is empty. Do not ﬁ ll it with dry

items only, such as nuts, almonds etc.

∙ After using the blender, switch off and

remove the plug from the wall socket.

Wait until the motor has come to a

complete standstill before removing the

blender jug.

Crushing ice

Ice-cubes can be easily crushed in the

blender jug:

Fill the jug a quarter full with ice cubes, and

then ﬁ t it to the motor housing, as described

in the section Operation. Put on the lid with

the stopper in place, and use the pulse

function (P) to operate the appliance for

about 2 seconds. Wait until the ice cubes

have collected in the bottom of the jug again

and then repeat the process, until the cubes

have been reduced to the required size.

Wind-up power cord storage

The power cord can be wound up for storage

in the base of the motor housing. Unwind it

completely before operation.

Cleaning and care

∙ Always remove the plug from the wall

socket before cleaning the appliance.

∙ To avoid the risk of electric shock, do not

clean the motor housing or the power

cord with water and do not immerse them

in water. The motor housing may be

wiped with a slightly damp, lint-free cloth.

∙ Do not use abrasives, harsh cleaning

solutions or hard brushes for cleaning.

∙ For cleaning directly after use, ﬁ ll the

blender jug with around 700 ml of

warm water and a little detergent. Let

the appliance run for a short period

as described in the section Operation.

Afterwards, rinse the blender jug, lid and

stopper with fresh water. All parts must

me thoroughly dried afterwards.

∙ These parts are not dishwasher-safe.

∙ If necessary, the sealing gasket on

the blender jug lid can be removed for

cleaning. Before the appliance is used

again, the gasket must be replaced.

∙ If required, the blade unit for the blender

jar can be detached for cleaning: ﬁ rst

remove the collar under the jar by turning

it clockwise (see pic. A), and lift out the

blade unit (pic. B). Caution: The blades

are extremely sharp. The gasket in the

blender jug cannot be removed. Clean the

blade unit with a suitable brush. Wipe the

gasket with a moist cloth. To re-assemble,

place the blade unit on the gasket, ﬁ t the

collar and lock it by turning it counter-

clockwise all the way, observing the

markings on the collar).

Information for testing institutes:

The following recipe may be used:

Mix 400 g soaked carrots and 600 g water

for 3 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin SM 3734 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info