Bedienungsanleitung Severin SM 3738 (Seite 13 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

602877

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

∙ Replace the lid so that the spout is

completely covered.

∙ The lid must be ﬁ tted at all times

whenever the mixer is operated.

∙ To add ingredients during operation, the

stopper in the centre of the lid can be

removed. Do not put any objects into

the blender jug while the appliance is

operating.

∙ Insert the plug into the wall outlet and use

the rotary control to select the required

power setting.

∙ Caution: Do not operate when the

blender jug is empty. Do not ﬁ ll it with dry

items only, such as nuts, almonds etc.

∙ After using the blender, switch off and

remove the plug from the wall socket.

Wait until the motor has come to a

complete standstill before removing the

blender jug.

Using the multi-mixer to crush ice

Ice-cubes can be easily crushed in the

blender jug:

Fill the jug a quarter full with ice cubes, and

then ﬁ t it to the motor housing, as described

in the section Multi-mixer operation. Put on

the lid with the stopper in place, and use the

pulse function (P) to operate the appliance

for about 2 seconds. Wait until the ice cubes

have collected in the bottom of the jug again

and then repeat the process, until the cubes

have been reduced to the required size.

Grinding top operation

∙ The grinding top is useful processing

spices, and for preparing pesto, dips and

purées.

∙ Cut the food to be processed into small

pieces and then put it into the grinding

top.

∙ Observe the maximum marking when

putting in the food. Do not overﬁ ll.

∙ Caution: Do not operate the appliance

when it is empty.

∙ Fit the blade unit in the grinding top and

turn it anti-clockwise all the way to lock it.

∙ Turn the grinding top over and ﬁ t it to

the motor housing so that the two arrow

marks are aligned.

∙ Then turn it clockwise until it is heard

locking into place.

∙ Insert the plug into a suitable outlet and

use the rotary control to select the desired

speed setting or the pulse function (P).

∙ Remove the plug from the wall socket

after grinding. Wait until the motor has

come to a complete standstill before

removing the grinding top and the blade

unit.

Wind-up power cord storage

The power cord can be wound up for storage

on the underside of the unit. Unwind it

completely before operation.

Cleaning and care

∙ Always remove the plug from the wall

socket before cleaning the appliance.

∙ To avoid the risk of electric shock, do not

clean the motor housing or the power

cord with water and do not immerse them

in water. The motor housing may be

wiped with a slightly damp, lint-free cloth.

∙ Do not use abrasives, harsh cleaning

solutions or hard brushes for cleaning.

∙ Cleaning the blender jug:

To clean immediately after use,

ﬁ ll the blender jug with around 700 ml

of warm water and a little detergent. Let

the appliance run for a short period as

described in the section Operation. Then

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin SM 3738 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info