Bedienungsanleitung Severin SM 9495 (Seite 10 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

602864

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Before using for the ﬁ rst time

Remove any packaging materials and check

that all components are present.

Before the appliance is used for the ﬁ rst

time, or after extended periods of non-use, it

should be thoroughly cleaned as described

in the section Cleaning and care.

Storing accessories

The stirring and heating accessories may be

stored in the lid. First, put the smooth collar

in with its opening facing up, and then ﬁ t the

serrated head inside.

Operation

We recommend using milk with a high

protein content. For best results, the

milk should be taken from the refrigerator

immediately before frothing.

The underside of the container and the contact

area on the inside of the base must be clean

and dry.

Choosing the stirring head

∙ For frothing and heating milk at the same

time, use the serrated head.

∙ For simply heating milk, put the serrated

stirring head in the collar, making sure

they are ﬁ tted inside the container with the

collar facing down.

Fill amounts

∙ Always observe the minimum mark and

ensure the container is ﬁ lled with at least

60 ml milk.

∙ For frothing, ﬁ ll the container to a

maximum of 120 ml (lower max mark

∙ For heating, ﬁ ll the container to a

maximum of 180 ml (upper max mark

Heating or frothing milk

∙ Place the container onto the base.

∙ Remove the lid from the milk container.

∙ Place the appropriate head onto the

mounting protrusion inside the bottom of

the container.

∙ Put the required amount of milk into the

container.

∙ Place the lid on the container.

∙ Insert the plug into a suitable wall socket.

Press the On/Off switch.

∙ There is then a beep-signal, and the

motor can be heard starting up.

∙ The appliance begins to heat up and stir

the milk.

∙ Once the milk is sufﬁ ciently hot, the

stirring and heating processes stop

automatically, and a number of beep-

signals are heard.

∙ You can now remove the milk container

from the base.

∙ Pour out the hot milk, or use a suitable

spoon to take off the milk froth.

∙ The cooling system continues to run for a

brief period. Remove the power cord from

the socket only when it has stopped. .

Remarks

Always allow the appliance to cool down

ﬁ rst, before starting a new cycle.

Making hot cocoa

The appliance is also suitable for the

preparation of cocoa beverages. Proceed

as described in ‘Heating up or frothing milk’

(having ﬁ tted the stirring insert and collar)

and turn the appliance on. Take off the lid

after about a minute, put in the desired

amount of cocoa powder and replace the lid.

To prevent the mechanism from becoming

blocked, do not use grated chocolate or

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin SM 9495 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info