on after the timer is activated.
Timer
By using the timer, the cooking time can be
selected (max. 60 minutes). The indicator
lamp will be on while a heating element is in
operation. After the pre-programmed time
has elapsed, an acoustic signal indicates that
the heating elements are switched off. To
switch off the oven, the heating elements
must be switched off as well.
Before first use
-
Clean the appliance (see ‘General
cleaning and care’) and completely
remove any packing materials.
-
Before using the appliance for the first
time, let it heat up for 10 minutes with
both heating elements switched on.
When the appliance is switched on for
the first time, a slight smell may be
emitted. This is normal and will only last
for a very short time. Ensure sufficient
ventilation.
Operation
-
Before using the appliance, make sure
that the reflector sheet is fitted in its
proper position underneath the heating
elements.
-
Pre-heat the oven compartment for
several minutes with the door closed,
using both heating elements. Set the
temperature control knob to the required
temperature level and use the timer
control knob to select the desired pre-
heating time.
-
Place the food to be cooked on the
baking rack. When cooking food
containing fat or moisture, use the baking
tray to stop any dripping into the interior
of the appliance.
-
The baking tray must always be placed
on the baking rack and inserted into one
of the leading rails.
-
Close the glass door, set the temperature
control knob to the required temperature
level and use the timer knob to select the
desired cooking time.
-
For overhead baking or grilling, the
upper heating element should be used.
-
Use only the lower element if the dish
being cooked is so close to the upper
element as to cause burning or excessive
browning.
-
The switch settings (upper heat/lower
heat) may be changed during the cooking
process.
-
After the pre-programmed cooking time
has elapsed, the timer will automatically
switch off the heating elements. To
switch off the appliance earlier, set the
control switch to the ‘0’ position.
-
When opening the hot glass door after
operation, always use the handle. To
remove the baking tray, always use the
handle provided with the appliance and
an oven cloth. Always place the baking
tray on a heat-resistant surface.
-
After use, set the 4-position switch to it’s
‘0’ position and remove the plug from the
wall socket.
General Care and Cleaning
● Before cleaning the appliance, ensure it is
disconnected from the power supply.
When cleaning the appliance, observe the
following instructions:
-
ensure that the appliance has cooled
down completely.
-
To avoid the risk of electric shock, do not
clean the appliance with water and do
not immerse it in water.
-
The appliance may be wiped with a
slightly damp lint-free cloth. Do not use
abrasives or harsh cleaning solutions.
The baking tray may be cleaned with a mild
household detergent.
If necessary, the reflector sheet may be
removed before cleaning. Make sure that
the reflector sheet is fitted in its proper
position underneath the heating elements
after cleaning.
5
