Bedienungsanleitung Severin TO 2044 (Seite 12 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

602736

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

∙ The switch settings (upper heat/lower

heat) may be changed during the cooking

process.

∙ To interrupt the cooking process

temporarily, set the 7-position switch to

the ‘ ’ position.

∙ Always use the door handle to open

the hot door after use. When removing

the baking tray or rack, use the handle

provided. Always place the tray and rack

down on a heat-resistant surface.

∙ After use, set the 7-position switch to the

‘

’ position and remove the plug from

the wall socket.

Using the hot-plates

∙ Always place a pot / saucepan on the

hot-plate ﬁ rst.

∙ Large hot-plate:

Set the 7-position switch to the required

temperature.

∙ Small hot-plate:

Set the temperature control to the

required temperature.

∙ With one or both hot-plates switched on,

the indicator lamp is lit.

∙ Ensure that the pot is clean and dry on

the outside. Do not use stain covered or

sooty pots / saucepans.

∙ To prevent damage to the hot-plate, only

use pots / saucepans with ﬂ at bottoms.

Most suitable are pots speciﬁ cally

designed for use on electric plates (see

picture I).

∙ Always make sure that the pot / saucepan

used is of at least the same diameter

as the plate; this minimises the loss of

heat and prevents the plate from being

damaged as a result of uneven heat

distribution.

∙ After use, set the 7-position switch to the

‘

’ position (or the temperature control

to ‘0’) and remove the plug from the wall

socket.

Cleaning and care

∙ Before cleaning the appliance, ensure it is

disconnected from the power supply and

has completely cooled down.

∙ To avoid the risk of electric shock, do not

clean the appliance with water and do not

immerse it in water.

∙ Do not use abrasives, harsh cleaning

solutions or spray-type oven cleaners.

∙ The exterior housing and the door may be

cleaned with a damp, lint-free cloth.

∙ The baking tray and rack may be cleaned

using hot water and a mild detergent.

∙ After use, a wet cloth may be used to

remove any spills from the plates.

∙ Following a longer period of use, a special

commercially available cleaning agent

should be used to treat the plates.

Changing the bulb inside the oven

compartment

The bulb is located in the right-hand side

panel behind a glass plate.

∙ Allow the appliance to cool down.

∙ Remove the glass plate by turning it anti-

clockwise.

∙ Remove the defective bulb from its socket

by turning it anti-clockwise.

∙ Fit a new15V bulb (socket-type E14) into

the socket by turning it clockwise.

∙ Replace the glass plate and secure it by

turning clockwise.

Disposal

Devices marked with this symbol must be

disposed of separately from your household

waste, as they contain valuable materials

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin TO 2044 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info