Bedienungsanleitung Severin TO 9488 (Seite 13 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Finnisch)

712926

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

elements. Use the holding clamps to

secure the food in the centre of the spit.

∙ Any parts sticking out (e.g. wings of a

chicken) should be held in with a tooth-

pick, a piece of string or other suitable

means. This ensures that no part of the

food can protrude or come off during the

cooking process.

Inserting and removing the rotating spit:

∙ Once the food has been securely

attached, place the spit onto the handle

assembly. Ensure that the indentations

in the handle assembly ﬁ t into the

corresponding recesses in the spit.

∙ Slide the spit end-piece with the drive unit

connection into the drive unit (see picture

II).

∙ Place the idle end of the spit into its

holding bracket on the opposite side (see

picture I).

∙ To remove the rotating spit, follow these

steps in reverse order.

Pizza stone

∙ Always place the pizza stone on the

middle of the grill rack before inserting the

rack into the appliance.

∙ Preheat the appliance to the required

temperature as described in the section

Operation.

∙ With certain pre-baked pizzas made from

especially light dough, the pre-heating

phase should be shortened; this is to

prevent the bottom layer of the pizza

dough from browning too fast.

∙ After pre-heating, open the door and use

a spatula to place the pizza on the centre

of the stone. For a nice crust around the

rim, the pizza should be slightly smaller

than the stone.

∙ The pizza is ready once the cheese

topping has melted and the bottom of the

dough is slightly brown. Use a spatula for

removing the pizza and serving it.

Start up

∙ Clean the appliance (see General care

and cleaning) and remove any packing

materials completely.

∙ Before using the appliance for the ﬁ rst

time, let it heat up for 10 minutes with

both heating elements on. When the

appliance is switched on for the ﬁ rst time,

a slight smell may be emitted. This is

normal and will only last for a very short

time. Ensure sufﬁ cient ventilation.

Operation

∙ Before using the appliance, make sure that

the crumb tray is ﬁ tted in its proper position

underneath the lower heating element.

∙ Pre-heat the oven compartment for

several minutes with the door closed,

using both heating elements. Set the

temperature control knob to the required

level and use the timer control knob to

select the desired pre-heating time. The

indicator lamp switches off once the pre-

set temperature has been reached. The

appliance is now pre-heated and ready for

use.

∙ Place the food to be cooked on the baking

rack. When cooking food containing fat or

moisture, use the baking tray to stop any

dripping into the interior of the appliance.

When using the rotating spit, always

ensure that the baking rack and baking

tray are properly inserted into one of the

lower guide rails.

∙ The baking tray must always be placed

on the baking rack and inserted into one

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Severin TO 9488 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info