Bedienungsanleitung Sevva Smart Infrared Heater (Seite 6 von 16) (Englisch, Holländisch)

811787

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Manuel

EN Sevva Smart Infrared Heater

Simply Heating ON/OFF mode with 24hours timer

1. Check the heater to be sure it is not damaged before using.

2. Insert the plug in the socket;

3. Turn the main switch on, you will hear “beep”, the full screen will be light on for 1.5

seconds , then display “--”, WIFI light ashing and the heater is in standby mode;

4. Press “ON/OFF” switch,the display screen will show the room temperature.

5. Press the “+ or -” key to adjust the temperature setting, it will ash 5 seconds on the

display to conrm the setting temperature , then back to room temperature display.

With each key press , the temperature will be increased (+) or decreased (-) by one

degree.

6. Heater will start working when the setting temperature is 1 degree higher than

room temperature, or stop working when the setting temperature is 1 degree lower

than room temperature.

7. The device will retain the temperature setting by switching itself on and o

automatically.

Timer:

8. Press “T”to set the 0-24 hours timer, with each key press , the timer will go a hour

forwards ,cycle as:

Fixed Weekly mode Program (operated by the key on the control box)

1. When it’s working, press the “P” key to enter the weekly timing function,

P1-P2-P3-P4-P5-P6, and it will be cycle as follows:

P1- works from 8:00am to 5:00pm every day,

P2 - works from 6:00pm to 7:00am every day,

P3 - works from 8:00am to 5:00pm every day except Saturday and Sunday;

P3 - works from 6:00pm to 7:00am every day except Saturday and Sunday;

P5 /P6 - backup for update in future.

2. When the rst time enter the weekly timing mode after power o, check the week

and time rst: it will display D1(means Monday), press “+” or “-” to set D1, D2, D3, D4,

D5, D6, D7, which means Monday, Tuesday, Wednesday, Thursday, Friday, Saturday

and Sunday, press “+” or “-” to select the current day of the week and then press the

“P” key to conrm, then the rst two digits of the display ashes, means to set the

time by hour ,press “+” or “-” to adjust the hour time, then press the P key to conrm

the current hour time, then the last two digital of the display ashes, means to set

the time by minute,press “+” or “-” to adjust the minute time,press P to conrm

the minute time.Then back to weekly mode program, the device will be on and o

according to the xed program, the weekly mode icon will be light on.

3. Then you can set the target temperature by press “+” or “-”.

...

23h

24h

Using the heater without smartphone

Note: The countdown timer is set after 5 seconds unchanged blinking, then display

room temperature.

Note: Weekly mode program is only to set the time, temperature need to be set

separately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sevva Smart Infrared Heater Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info