Bedienungsanleitung Shada 800548 (Seite 1 von 6) (Deutsch, Englisch, Holländisch, Französisch)

663243

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

LED’s

light

BRAND

SHADA

230V

50Hz

Non Dimmable

15.000h

0,077kg

off

15.000

100%

38°

T°C:

T≥-20

T≤50

Ra = 80

CRI

Ra = 80

360

lumen

≈50

Watt

WARM

WHITE

2700K

Art. no. 800548

30°

MV#: 20170510 10:28

These safety notes must be observed in all cases! Plea-

se read the following instructions carefully to ensure

proper assembly and use of the device . Any warranty

claim is void in case of damages caused by non-obser-

vance of these operating instructions. We are not liable

for consequential damages or for damages to property

or persons caused by non-observance of the safety

notes or improper assembly of the device.

General safety notes

Please read the operating instructions for the LED luminaire before

use. The operating instructions are part of the product. They contain

important notes on start-up and handling of the device. Always keep the

enclosed operating instructions with the device so as to be able to look up

information. They must be enclosed when passing the device on to third

parties.

Safety precautions

Never attempt to open the device other than described in this

manual, no serviceable parts inside. The LED luminaire cannot be

repaired; this part must be immediately disposed in case of a defect.

Ensure sucient ventilation of the device. Never cover it during

operation. Do not install in reach of children or animals.

Any other use of the device than described above can damage the

product or endanger the user due to e. g. short-circuits, ﬁre or an

electric shock. The entire product may not be modiﬁed or adapted.

the product is built with High luminosity quality LEDs, that are being

powerd by a ﬂat, integrated power-supply. The high eciency of

the used parts guaranteed low power consumption, long liﬁtime,

reliability and safety.

the elegant and stylish design is made from high-grade UV-resistant

plastic. An integrated generously sized Aluminium heatsink ensures

stable operating circomstances for the LED and other electronic

components.

the design makes for a soft-toned and even light spreading, no ﬂicker

and no diusion.

The product contains no lead, Mercury or other hazardous materials.

It oers a wide area of applicability. for instance: sales centre, hotel,

restaurant, residence, cellar, bathroom, porch, etc.

Notes:

Installation only by persons with electro technical

knowledge and experience.

Mounting instructions

1. Turn o the power and check that there is no power on the wire

before installation starts. (Adhere to safety regulations)

2. Cut a suitable mounting hole on ceiling / wall according to size

requirement of the item (T 1-D).

3. connect the power wire with the terminal strip at the power

supply outlet L=brown / N=blue (FIG. 01).

4. Pinch both springs, then push light into installation hole.

5. Double-check everything is well-connected

6. Make sure the light is ﬁxed properly in the ceiling (Picture 3) then

turn on the power.

FIG. 01

Do not connect

! !

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shada 800548 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info