Bedienungsanleitung Shark ION Robot RV700 N Series (Seite 6 von 13) (Englisch)

743744

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

sharkclean.comsharkclean.com

USING THE SHARK ION™ ROBOT

SETTING THE CLEANING SCHEDULE

Dock Max

Clean

Enter

Hold / to Set

1 To schedule a cleaning, the day and time must

be set. If you haven’t yet set the date and time,

follow the steps on the previous page.

2 To schedule or edit a cleaning, press and hold

the SCHEDULE button (with the calendar icon)

on the remote control for one second. On the

screen, the day of the week display will ﬂash.

3 Use the UP/DOWN arrows on the remote to

select the day of the week for your scheduled

cleaning. (Days with a cleaning already scheduled

will be circled. If a day is not circled, there is no

cleaning scheduled for that day yet.) Press the

CLEAN/ENTER button on the remote to set the

day. The day of the week will remain ﬂashing

until the cleaning time is completely scheduled.

4 Use the UP/DOWN arrows on the remote to

turn ON or OFF the cleaning scheduled for the

selected day. Press CLEAN/ENTER to conﬁrm

selection.

IMPORTANT: If your robot does not beep or show the Schedule icon, you may be out of range. To resend

the scheduling data to your robot, move close to the robot and press and hold the UP arrow on the remote

for two full seconds, until the Signal icon appears. Your robot will beep and display the Schedule icon. Make

sure the remote is pointed directly at your robot.

5 If OFF is selected, the screen will display the

days of the week again, with no time or AM/PM

options. If ON is selected, a circle will appear

around the selected day. To change the time of

the cleaning on the selected day, use the UP/

DOWN arrows on the remote to select the hour

of the cleaning, then press CLEAN/ENTER to set.

6 On the screen, the minutes ﬁeld in the time

display will begin ﬂashing. Use the UP/DOWN

arrows to select the minutes, then press the

CLEAN/ENTER button to set. On the screen, AM

and PM will begin to ﬂash.

7 Use the UP/DOWN arrows to select AM or PM,

then press the CLEAN/ENTER button to set. Use

the UP/DOWN arrows on the remote to select

another day for a scheduled cleaning.

8 When all days and times for scheduled cleanings

are set, press the SCHEDULE button on the

remote to complete set up. (After 20 seconds of

inactivity, the system will time out and transmit

your current schedule.) Your robot should beep

and show the Schedule icon.

VIEWING SCHEDULED CLEANINGS

1 To view previously scheduled cleanings, press

the SCHEDULE button on the remote.

2 Once the SCHEDULE button has been selected,

the screen will display the days of the week.

Circles will appear around the days with

scheduled cleanings. (This action will time out

within 15 seconds of selecting the SCHEDULE

button on the remote.)

TURNING YOUR SCHEDULE ON/OFF

1 To turn the schedule ON, press and hold the UP

arrow on the remote for two full seconds. The

Signal icon will appear on screen and a Schedule

icon will appear on your robot.

2 To turn the schedule OFF, press and hold the

UP arrow on the remote for two full seconds.

The Signal icon will appear on screen and the

Schedule icon will disappear from your robot.

NOTE: You will need to have at least one day scheduled for cleaning to toggle the schedule ON/OFF.

USING THE SHARK ION™ ROBOT

USING THE SHARK ION ROBOT REMOTE

SETTING THE DAY AND TIME

The remote control requires 2 AAA batteries. Install batteries into remote before using.

With the remote control, you can start and stop Shark ION Robot, select Max Cleaning

mode, send the unit back to the charging dock, and program a cleaning schedule for

your robot.

Dock Max

Clean

Enter

Hold / to Set

1 Press and hold the TIME button (with the clock

icon) on the remote for one second. On the screen,

the day of the week display will begin ﬂashing.

2 Press the UP/DOWN navigation arrows on the

remote control to select the day of the week,

then press the CLEAN/ENTER button to set. On

the screen, the hour ﬁeld in the time display will

begin ﬂashing.

3 Use the UP/DOWN arrows on the remote control

to select the hours, then press the CLEAN/

ENTER button to set. On the screen, the minutes

ﬁeld in the time display will begin ﬂashing.

4 Use the UP/DOWN arrows to select the minutes,

then press the CLEAN/ENTER button to set. On

the screen, AM and PM will begin to ﬂash.

5 Use the UP/DOWN arrows to select AM or PM,

then press the CLEAN/ENTER button to set.

6 Once you have ﬁnished setting the time, you can

proceed to setting a cleaning schedule.

DockMax

Clean

Enter

Hold / to Set

1 Signal Icon

2 Time Icon

3 Schedule Icon

4 Days Of The Week (Mon–Sun)

5 Scheduling (On/O)

6 Time

A Dock Button

B Max Mode Button

C Navigation Arrows

D Clean/Enter Button

E Time Button

F Schedule Button

DockMax

Clean

Enter

Hold / to Set

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark ION Robot RV700 N Series Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info