Bedienungsanleitung Shark ION Robot RV755 (Seite 13 von 16) (Englisch)

743710

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

24sharkclean.com

ENGLISH

23 1-800-798-7398

TROUBLESHOOTING GUIDE

WARNING: Always turn off Power switch before performing any maintenance.

END-USER LICENSE AGREEMENT

FOR SHARKNINJA SOFTWARE

IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT

CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL OR USE OF THIS PRODUCT:

SharkNinja Operating LLC’s (“SharkNinja”) End-User License Agreement (“EULA”) is a legal agreement

between You (either a single entity or an individual) and SharkNinja for SharkNinja’s Software Applications,

including those installed by You onto your SharkNinja products or already installed on your device,

including all ﬁrmware (referred hereafter as “SN APPS”). By installing, copying, checking a box, clicking

a button conﬁrming your agreement to these terms, or otherwise continuing to use the SN APPS, You

agree to be bound by the terms of this EULA. This license agreement represents the entire agreement

concerning SN APPS between You and SharkNinja, and it supersedes any prior proposal, representation,

or understanding between the parties. If You do not agree to the terms of this EULA, do not install or use

the SN APPS or this product.

The SN APPS are protected by copyright laws and international copyright treaties, as well as other

intellectual property laws and treaties.

1. GRANT OF LICENSE. The SN APPS are licensed as follows:

1.1 Installation and Use. SharkNinja grants You the right to download, install, and use SN APPS on the

speciﬁed platform for which the SN APP was designed and in connection with SharkNinja products with

which the SN APPS are designed to operate (“SN Devices”).

1.2 Backup Copies. You may also make a copy of SN APPS downloaded and installed by You for backup

and archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

2.1 Maintenance of Copyright Notices. You must not remove or alter any copyright notices on any and all

copies of the SN APPS.

2.2 Distribution. You may not distribute copies of the SN APPS to third parties.

2.3 Prohibition on Reverse Engineering, Decompilation, and Disassembly. You may not reverse engineer,

decompile, or disassemble SN APPS, except and only to the extent that such activity is expressly

permitted by applicable law notwithstanding this limitation.

2.4 Rental. You may not rent, lease, or lend SN APPS without written permission from SharkNinja.

2.5 NOT FOR RESALE SOFTWARE. Applications identiﬁed as “Not for Resale” or “NFR,” may not be

resold, transferred, or used for any purpose other than demonstration, test, or evaluation.

2.6 Support Services. SharkNinja may provide You with support services related to SN APPS (“Support

Services”). Any supplemental software code provided to You as part of the Support Services shall be

considered part of SN APPS and subject to the terms and conditions of this EULA.

2.7 Compliance with Applicable Laws. You must comply with all applicable laws regarding use of SN APPS.

If any error lights are illuminated or ﬂashing on your Shark ION ROBOT

™

, see the error

code chart below:

ERROR CODE SOLUTION

All LED lights are o

Unit is turned off. Cycle power switch. If no response,

plug in to charge unit.

Red “Replace” LED light is on

Your battery is ready to be replaced.

Visit sharkclean.com for replacement

DOCK and SPOT alternate

ﬂashing

A side brush is stuck. Remove debris from side

brushes.

DOCK and SPOT ﬂashing

together

Something is stuck in the main brushroll. Remove

obstruction.

CLEAN ﬂashing blue

The front wheel sensor, drop sensor, or bumper is

reporting an error. Make sure your robot is able to

move freely by moving it to a new location on a level

surface. Make sure the front bumper is not stuck. If

Clean light continues to ﬂash blue, remove the front

wheel and clean the wheel cavity.

SPOT ﬂashing blue

The unit cannot move due to surface or obstruction.

Move robot to a new location.

CLEAN ﬂashing red

Cliff sensors are reporting an error. Wipe cliff sensors

with a clean cloth.

Robot cannot start due to an error. Ensure your robot is

on a level surface with no obstructions.

“!” symbol ﬂashing

Suction motor failure. Remove blockages and clean

ﬁlters. Remove dust bin and make sure nothing is

blocking suction.

CLEAN ﬂashing red and “!”

stays solid red

Your charger is experiencing an issue. Please contact

Customer Service at 1-800-798-7398.

“!” and CLEAN symbols

ﬂashing

Your robot’s BotBoundary™ sensors are reporting an error.

Please contact Customer Service at 1-800-798-7398.

CLEAN solid red

The dust bin has been removed and needs to be

reinserted.

CLEAN solid blue

Your robot is in sleep mode. Press any button on the

robot or remote to start it again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark ION Robot RV755 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info