Bedienungsanleitung Shark IQ Robot - RV1000AE Series (Seite 6 von 15) (Englisch)

743690

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

sharkclean.comsharkclean.com

PREP YOUR HOME MAPPING AND NAVIGATION

MANUAL CLEANING MODE

To manually start a cleaning cycle, press the Clean button on the robot or on the mobile app. To stop the

robot before it ﬁnishes cleaning and automatically returns to the base, press the Dock button.

NOTE: Scheduling can only be done in the app.

Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it

cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the

included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily

cleaning to ensure all ﬂoor areas are regularly maintained.

Clean Dock

OBSTRUCTIONS

Clear cords and small objects

from ﬂoors and open doors

to ensure a complete map of

your home.

SCHEDULING

For a constant state of clean,

set up a whole home cleaning

schedule in the app.

THRESHOLDS

Your robot may have some

trouble clearing some high

thresholds. Block o high

thresholds with the included

BotBoundary strips.

AVOID MOVING THE

ROBOT OR BASE

While your robot is cleaning,

do not pick it up and move it,

or move the charging base—

this could impact the robot’s

ability to map your home.

STAIRS

Your robot's cli sensors will

prevent it from falling o

ledges. For your robot’s cli

sensors to work properly,

all runners, rugs, or carpets

must be at least 8 inches

from any stairs (or extend

over the edge of the stairs.)

CHECK BASE FILL LEVEL

During the ﬁrst few weeks,

your robot will empty more

often than usual. Check the

ﬁll level regularly. The dust

bin is designed to hold up

to 30 days’ worth of debris,

but home environments

vary, and the bin may ﬁll up

quicker in some homes.

4-inch

Min.

RUMPELSTILTSKIN

Schedule History

EDIT OPTIONS

MapsControl

Shark

Kitchen

Living Room

Dining Room

NOTE: Be sure to charge the robot completely before its ﬁrst cleaning so that it can explore, map, and clean as much of

your home as possible. It may take up to 6 hours to fully charge the robot.

NOTE: Avoid picking up and moving the robot or base. If either are relocated, the robot may not be able to follow its

intelligent cleaning path, or ﬁnd its way back to the base. If the robot is picked up or moved for any reason, it should be

returned to within 6 inches of its last location.

NOTE: Bot boundaries must be placed ﬂat-side down,

NOTE: bot boundaries should always be used near

carpeted stairs.

As it cleans, your robot will create a map of your

home. It may take several cleanings for the robot to

ﬁnish its mapping. Once mapping is complete, an

Interactive Map of your ﬂoor plan will be available

on the app.

The interactive map in the app allows you to name

rooms, then select which rooms to clean, and

send the robot to immediately clean one speciﬁc

location.

As cleanings continue, the robot will update and

reﬁne its path to provide optimized cleaning coverage.

After each use, a cleaning report will be available

in the app.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark IQ Robot - RV1000AE Series Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info