Bedienungsanleitung Shark IQ Robot AV993 Series (Seite 7 von 13) (Englisch)

743719

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

sharkclean.comsharkclean.com

MAINTENANCE

EMPTYING THE DUST BIN

Press the Dust Bin Release Tab and slide out the

dust bin.

CAUTION: Turn o power before performing any maintenance.

To avoid spills, be sure to hold the dust bin in an

upright position. Use the ﬁnger slots to open the lid.

Empty debris and dust into trash.

USING THE SHARK IQ ROBOT®

NOTE: Make sure to insert the dust bin completely, until

it clicks into place.

Look between the ﬁlter and plastic shield and make

sure there is no debris buildup.

Remove shield and clear any debris buildup as

needed with a dry cloth or soft brush.

ERROR CODE PROBLEM

! (RED) + Wi-Fi indicator (RED Flashing) Wrong password for Wi-Fi

! (Flashing red) + Wi-Fi (RED) SSID cannot be found, try connecting again

! + Wi-Fi (Flashing RED alternately) Wrong user name or password for your Shark account

! + Wi-Fi (Flashing RED at the same time) Cannot connect to Wi-Fi

USING THE SHARK CLEAN™ APP AND VOICE CONTROLS

SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA

Visit sharkclean.com/app for setup instructions which include how to enable Shark Skill for Amazon Alexa

and using with Google Assistant.

Google Assistant:

“OK Google, tell Shark to start cleaning.”

“OK Google, tell Shark to pause my robot.”

“ OK Google, tell Shark to send my robot to

the dock.”

Amazon Alexa:

“Alexa, tell Shark to start cleaning.”

“Alexa, tell Shark to pause my robot.”

“ Alexa, tell Shark to send my robot to

the dock.”

Please visit sharkclean.com/app or call 1-888-228-5531 for answers to all your app questions.

Get the most out of your Shark IQ Robot with these app features:

• Recharge and Resume

Use Recharge and Resume to help ensure

complete, multi-room coverage in your home.

• Volume Control

You can adjust the volume level of your robot's

audio notiﬁcations.

• Scheduling

Set whole-home cleanings

for any time, any day.

• Control From Anywhere

Wherever you are, you’re in

control of your robot.

• Cleaning Reports

Each time your robot cleans,

your app will generate a

cleaning report.

Search for SharkClean in the app store and download the app to your iPhone

or Android

WI-FI TROUBLESHOOTING

• To use the app, your phone must be connected to

a 2.4GHz network. The app will only work on a

2.4GHz network.

• Typical home Wi-Fi networks support both 2.4GHz

and 5GHz.

• Do not use a VPN or a proxy server.

• Make sure Wi-Fi isolation is turned o on the

router.

• If you cannot connect, call 1-888-228-5531.

STILL CAN'T CONNECT?

Restart your phone

Reboot your robot

• Press the power button on the side of the ROBOT

to the OFF position. Wait 10 seconds, then press it

again to turn power back ON.

Reboot your router

• Unplug the router power cable for 30 seconds,

then plug it back in. Allow several minutes for your

router to reboot completely.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark IQ Robot AV993 Series Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info