Bedienungsanleitung Shark RV1000 Series (Seite 6 von 25) (Englisch, Französisch)

743720

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

sharkclean.comsharkclean.com

PREP YOUR HOME

USING THE SHARK IQ ROBOT™

IQ NAVIGATION™

RUMPELSTILTSKIN

Schedule History

EDIT OPTIONS

MapsControl

Shark

Kitchen

Living Room

Dining Room

As it cleans, your robot will create a map of your

home. It may take several cleanings for the robot to

ﬁnish its mapping. Once mapping is complete, an

Interactive Map of your ﬂoor plan will be available

on the app.

MANUAL CLEANING MODE

To manually start a cleaning cycle, press the Clean button on the robot or on the

mobile app. To stop the robot before it ﬁnishes cleaning and automatically returns to

the dock, press the Dock button.

IMPORTANT: Before cleaning an entire room for the

ﬁrst time, we recommend that you ﬁrst test your robot

on a small section of the ﬂoor to ensure there is no

scratching.

NOTE: Scheduling is one of many features that are only available in the app.

Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it

cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the

included BotBoundary™ strips. For best results, prepare your home as indicated below, and schedule a daily

cleaning to ensure all ﬂoor areas are regularly maintained.

NOTE: Be sure to charge the robot completely before its ﬁrst cleaning so that it can explore, map, and clean as much of

your home as possible. It may take up to 6 hours to fully charge your robot.

NOTE: Avoid picking up or moving the robot or dock. If either are relocated, the robot may not be able to follow its

intelligent cleaning path, or ﬁnd its way back to the dock. If the robot is picked up or moved for any reason, it should be

returned to within 15 cm (6 inches) of its last location.

Interactive Map

The interactive map in the app allows you to name

rooms, then select which rooms to clean, and

send the robot to immediately clean one speciﬁc

location.

As cleanings continue, the robot will update and

reﬁne its path to provide optimized cleaning coverage.

After each use, a cleaning report will be available

in the app.

Clean Dock

SCHEDULING

For a constant state of

clean, set up a whole-home

cleaning schedule cleaning

schedule in the app.

THRESHOLDS

Your robot may have trouble

clearing some thresholds

higher than 2.2 cm (7/8").

Block o high thresholds with

the included BotBoundary™

strips.

AVOID MOVING THE

ROBOT & DOCK

While your robot is cleaning,

do not pick it up and move

it to dierent rooms, or

move the charging dock—

this could impact the robot’s

navigation.

STAIRS

Your robot's cli sensors will

prevent it from falling o

ledges. For the cli sensors

to work properly, all runners,

rugs, or carpets must be at

least 20 cm (8 inches) from

any stairs (or extend over the

edge of the stairs.)

BOTBOUNDARY™ STRIPS

PREPPING YOUR HOME USING

BOTBOUNDARY STRIPS

Use the BotBoundary strips to quickly and easily

create no-go zones to keep your robot out of the areas

you would like it to avoid. These may include:

• Near power cords

• In front of thresholds higher than 2.2 cm (7/8")

BotBoundary strips

USAGE INSTRUCTIONS

1. You can cut BotBoundary

strips to shorten them as

needed. (.5 m/18-inch

minimum) If cutting a strip,

make sure it’s still long enough

to cover the entire area you

need to block o. Gaps may

cause BotBoundary strips to

malfunction.

2. Make sure each BotBoundary

strip lies completely ﬂat

against the ﬂoor, with no

overlapping. NOTE: DO NOT

place BotBoundary strips on

top of one another.

3. For best results, place the

strips between ﬁxed objects

like furniture legs or door

frames, or make a closed loop

around an obstacle.

(.5 m/18" Minimum)

BotBoundary strip

OBSTRUCTIONS

Clear cords and small objects

from ﬂoors and open interior

doors to ensure a complete

map of your home.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark RV1000 Series Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info