Bedienungsanleitung Shark UF280 (Seite 8 von 11) (Englisch)

743232

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

sharkclean.comsharkclean.com

MAINTAINING YOUR VACUUM

TROUBLE SHOOTING

WARNING: To reduce the risk of shock and unintended operation, turn o

power and remove the ION Power Pack before servicing.

Vacuum is not picking up debris, no suction or light suction.

(Refer to Maintenance section for more information.)

• Check ﬁlters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the

ﬁlters before reinserting in the vacuum.

• Dust cup may be full; empty dust cup.

• Check ﬂoor nozzle for blockages; clear blockages if required.

• Remove any string, carpet ﬁbers, or hair that may be wrapped around the brushroll.

• Check connection between handvac and wand for blockages; clear blockages if required. If the issue

persists, please contact Customer Service.

Vacuum lifts area rugs.

• Check that vacuum is in ION POWER mode. Take care when vacuuming area rugs or rugs with delicately

sewn edges.

• Turn o the unit to disengage the brushroll and restart with the Power button.

Brushroll/Soft Roller does not spin.

• If Brushroll Indicator Light on the ﬂoor nozzle turns red, the brushroll has stopped spinning. Immediately

turn o and remove ION Power Pack from handheld vacuum and remove any blockages before

reconnecting and turning vacuum back on. If light turns green, the blockage has been successfully

cleared. If any blockages remains red, please contact Customer Service.

• If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand, and

nozzle. Try disconnecting and reattaching the pieces. If the headlights still do not illuminate, please

contact Customer Service.

Vacuum turns o on its own.

There are several possible reasons for the vacuum turning o on its own, including blockages, ION Power

Pack issues, and overheating. If vacuum turns o on its own, perform the following steps:

1. Check LED lights on ION Power Pack to see if it needs to be recharged. If power pack does not need

charging, turn o vacuum and remove power pack.

2. Empty dust cup and clean ﬁlters (see Maintenance section).

3. Check wand, accessories, and inlet openings and remove any blockages.

4. Allow unit and ION Power Pack to cool for at least 45 minutes, until it returns to room temperature.

5. Return power pack to vacuum and press Power button.

Note: If vacuum still does not operate properly, contact Customer Service.

LED lights on ION Power Pack are ﬂashing.

• Bottom LED light is ﬂashing (Fig. A): ION Power Pack needs to be charged.

• Top and bottom LED lights are ﬂashing (Fig. B): ION Power Pack temperature is not optimal, so charging

is temporarily paused. Leave power pack plugged in and charging will resume soon.

• If top 2 or bottom 2 LED lights are ﬂashing (Fig. C, Fig. D), call Customer Service.

Fig. A Fig. B Fig. C Fig. D

LIGHT INDICATOR WHAT IT MEANS

FLOOR and CARPET icons alternate

illuminating

Unit temperature is high. Turn o

vacuum. While unit is cooling, look

for blockages and remove any that

are found. Filters may also need to

be cleaned.

ION POWER and ION BOOST icons

are ﬂashing together

Blockage detected. Turn o unit and

remove blockage.

Headlights are ﬂashing

Debris caught in the brushroll. Turn

o the vacuum, then remove debris.

Garage door lid may not be properly

closed Turn o the vacuum, and

ensure the lid is properly clicked in on

both sides.

MAINTAINING YOUR VACUUM

TROUBLE SHOOTING

For all other issues, please call Customer Service at 1-800-798-7398.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark UF280 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info