Bedienungsanleitung Shark V1510 (Seite 2 von 2) (Englisch)

668672

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Cleaning & Changing the HEPA Dust Cup Filter cont.

3. Rotate the lower dust cup clockwise

to separate it from the filter chamber.

Empty and clean the dust cup. (See

illustration below.)

Filter

Chamber

Dust

Cup

Debris

Screen

7. “TapClean” the Debris

Screen or rinse under

a faucet until clean.

(See illustration at

right.) Remember that

the Debris Screen

must be completely

dry before reinstalling

in the vacuum.

3. Rotate the lower dust cup clockwise

to separate it from the filter chamber.

Empty and clean the dust cup. (See

illustration below.)

Filter

Chamber

Dust

Cup

Debris

Screen

7. “TapClean” the Debris

Screen or rinse under

a faucet until clean.

(See illustration at

right.) Remember that

the Debris Screen

must be completely

dry before reinstalling

in the vacuum.

8. Replace the Debris Screen on the

HEPA Dust Cup Filter and reinstall

filter assembly in the vacuum. (not

shown)

8. Replace the Debris Screen on the

HEPA Dust Cup Filter and reinstall

filter assembly in the vacuum. (not

shown)

NOTE: DO NOT OPERATE VACUUM WITHOUT FILTERS IN PLACE.

Rev. 06/04

Printed in Mexico

5. Separate the debris screen from the

HEPA filter cartridge by grasping the

debris screen with one hand and the

filter frame with the other and pull

apart. (See illustration below.)

Filter

Chamber

HEPA

Filter

Debris

Screen

6. Vigorously “TapClean”

the HEPA Dust Cup

Filter on a hard surface

until no more dust is

observed falling out from

between the pleats of

the filter. (See illustration

at right.)

CAUTION: The suction hole must be

open, free of any obstructions at all

times. Otherwise, the motor will overheat

and could become damaged.

PLEASE NOTE

: The white pleated

filter material in the HEPA Dust Cup

Filter will discolor over time -This is

NORMAL and will NOT affect the

performance of the filter. If the HEPA

Dust Cup Filter

is properly

"TapCleaned”

after each use

and suction

does not return

to 100%, then

we suggest that

the HEPA filter

be “TapCleaned”

vigorously until no

more dust can be removed, then

rinsed under the faucet and allowed to

dry for 24 hours before refitting into

the vacuum. (Fig. A) This should be

done once a month or when

suction appears reduced.

Fig. A

Wash once a

month or when

suction

appears

reduced.

Warning: Allow 24

hours for drying before

replacing in unit.

4. Remove the HEPA Filter from the filter

chamber. (See illustration below.)

5. Separate the debris screen from the

HEPA filter cartridge by grasping the

debris screen with one hand and the

filter frame with the other and pull

apart. (See illustration below.)

Filter

Chamber

HEPA

Filter

Debris

Screen

6. Vigorously “TapClean”

the HEPA Dust Cup

Filter on a hard surface

until no more dust is

observed falling out from

between the pleats of

the filter. (See illustration

at right.)

CAUTION: The suction hole must be

open, free of any obstructions at all

times. Otherwise, the motor will overheat

and could become damaged.

PLEASE NOTE

: The white pleated

filter material in the HEPA Dust Cup

Filter will discolor over time -This is

NORMAL and will NOT affect the

performance of the filter. If the HEPA

Dust Cup Filter

is properly

"TapCleaned”

after each use

and suction

does not return

to 100%, then

we suggest that

the HEPA filter

be “TapCleaned”

vigorously until no

more dust can be removed, then

rinsed under the faucet and allowed to

dry for 24 hours before refitting into

the vacuum. (Fig. A) This should be

done once a month or when

suction appears reduced.

Fig. A

Wash once a

month or when

suction

appears

reduced.

Warning: Allow 24

hours for drying before

replacing in unit.

4. Remove the HEPA Filter from the filter

chamber. (See illustration below.)

HEPA

Filter

HEPA

Filter

NOTE: DO NOT OPERATE VACUUM WITHOUT FILTERS IN PLACE.

EURO-PRO Operating LLC

94 Main Mill Street, Door 16

Plattsburgh, NY 12901

Tel.:

866-98shark

www.sharkvac.com

EURO-PRO Operating LLC

94 Main Mill Street, Door 16

Plattsburgh, NY 12901

Tel.:

866-98shark

www.sharkvac.com

Rev. 06/04

Printed in Mexico

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Shark V1510 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Shark V1510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info