Bedienungsanleitung Sharp 27F641 Operation Manual (Seite 42 von 60) (Englisch)

13199

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Dimension: 140 X 215 mm

POWER (DVD/VCR)

Press to turn the VCR or DVD

on and off.

STOP

Press to stop the tape or disc.

PAUSE

Press to temporarily stop the

tape or disc during playback

or recording (VCR only).

Press again to release PAUSE.

REVERSE

Press to rewind a tape or

reverse a disc. For some VCRs

or DVDs you may need to

press STOP first, then REVERSE.

FORWARD

Press to rapidly advance the

tape or disc. For some VCRs or

DVDs, you may need to press

STOP first, then FWD.

REC

Press to begin recording.

(VCR only)

DVD SKIP

Press to jump forward to the

beginning of the next chapter/track,

or backward to the beginning of the

current chapter/track, and

automatically start to play that

chapter/track.

VCR CHANNEL

UP ( )/ DOWN ( )

Press to scan up or down through

channels on the VCR.

REMOTE KEYPAD

Use to enter two-digit code

numbers when identifying your

VCR, DVD and CATV converter.

ENTER

PLAY

Press to playback a tape or disc.

Operation of Universal Remote Control

•

Universal Remote Control

With the purchase of your television set you

also have received the latest innovation in

remote control technology. With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

Note:

• Depending on the model, year produced,

brand and type of VCR, cable TV converter

and DVD, some models may not be compatible

with the remote control.

• Some brands may not enable channel

selection until the ENTER button is pressed.

In such case, try the following.

Example:

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

For detailed information on the use of the

Cable TV converter Box refer to their operating

manuals.

•

Using your Remote with your TV

After installing the batteries, press the TV/VCR

on the Remote to select the TV mode. (If you

can change the channel of the TV by pressing

CH a/s on the Remote Control, it is in the

TV mode.)

•

“Identifying” VCRs, cable TV converters

and DVDs

Your Remote Control has been set at the

factory to operate your TV and many remote

controlled VCRs, cable TV converters and

DVDs. However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs.

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends proper

signals to operate your accessory.

• This identifying step will not have to be

repeated until power to the Remote is

interrupted due to a battery failure.

•

Using your remote control with a VCR

Once you make certain the Remote Control

has “identified” your remote controlled VCR or

DVD, the Remote is ready to operate your unit.

The various VCR or DVD function buttons on

the Remote will not operate your VCR or DVD

if those features are not already found on your

unit.

• All VCR buttons will operate whether the

Remote is in TV or VCR modes.

• For detailed information on the use of the VCR

or DVD, refer to the operation manual of the

VCR or DVD.

27F541 42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp 27F641 Operation Manual Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info