12
ADVANCED Menu
1. Press the Cursor UP/DOWN buttons
E / F to select
a parameter from the list: OSD contrast, Tint control, NTSC Hue con-
trol, ECO mode or SVM. The red point mark indicates the selected
parameter.
2. Press the Cursor LEFT/RIGHT buttons
C / I to adjust picture
quality to your liking.
Select OSD contrast to adjust the contrast level of the On Screen
Display menus.
Select Tint control to adjust your desired skin colour (Cool or Warm).
Select NTSC Hue control to adjust the skin colour (Green or Red)
during NTSC signal reception through the external connectors.
Select ECO mode “On” to attenuate the contrast in the excessively
white areas of the picture.
Select SVM (Scan Velocity Modulator) to change the resolution of the
picture (Low, Medium or High). The TV is factory pre-set to “Medium”.
In this menu you can switch to the following menus:
Press the RED button to return to the LEVELS Menu.
Press the BLUE button to see the OTHERS Menu.
3. Press the MENU button ● to close the ADVANCED Menu.
OTHERS Menu
1. Press the Cursor UP/DOWN buttons
E / F to select:
Comb filter or Black level expander.The red point mark indicates the
selected item.
2. Press the Cursor LEFT/RIGHT buttons
C / I to select ON/OFF.
Select Comb filter (ON) to reduce the colour interference in picture
with fine details and the picture gets sharper.
Select Black level expander (ON) to activate the Dynamic
Compensation in the dark area of the picture.
In this menu you can switch to the following menus:
Press the RED button to return to the LEVELS Menu.
Press the YELLOW button to return to the ADVANCED Menu.
3. Press the MENU button ● to close the OTHERS Menu.
ADVANCED Menu
OTHERS Menu
