Bedienungsanleitung Sharp 50EQ6EA (Seite 7 von 108) (Alle Sprachen)

787663

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

ENEN

What is included in the box

Supply of this TV includes following parts:

• 1x TV • 1x TV stand installation packet

• 2x Remote control • 1x Quick Start Guide

• 4x AAA batteries

Attaching the Stand

Please follow the instructions on last page of this user manual.

Wall mounting the TV

1. Remove the four screws that are supplied in the wall mounting holes.

2. The wall mount can now be easily attached to the mounting holes on

the rear of the TV.

3. Install the wall mounting bracket to the television as advised by the

bracket manufacturer.

Connections

Connecting external devices - see the last page of this guide.

Getting started - initial set up

1. If rubber parts, foam parts or tape are attached to the TV frame, please

remove them gently.

2. Using the antenna cable (not supplied), connect the TV to the antenna

wall socket.

3. For connecting to the Internet with a wired connection connect a

Cat 5/Ethernet cable (not included) from the TV to your broadband

modem/router.

4. Insert the batteries supplied into the Remote control.

5. Connect the power cable to the Electrical outlet.

6. Then press Standby button to power on TV.

7. After turning the TV on, you will be welcomed by the First Time

Installation menu.

8. Please select language for TV menu.

9. Please set desired settings in remaining screens of First installation

menu.

TV Control Stick

TV control stick is located on the lower left corner of back side of the TV.

You can use it instead of remote control to control most of the functions

of your TV.

While TV is in standby mode:

• short press of control stick - Power On

While watching TV:

• RIGHT/LEFT – volume up/volume down

• UP/DOWN – changes channel up/down

• short press – Displays Menu

• long press – Standby Power Oﬀ

While in menu:

• RIGHT/LEFT/UP/DOWN – navigation of cursor in on-screen menus

• short press – OK/Con rm selected item

Choosing Mode Input/Source

To switch between the diﬀ erent input/connections.

a) Using the buttons on the remote control:

1. Press [SOURCE/ ] - The source menu will appear.

2. Press [▲] or [▼] to select the input you require.

3. Press [OK].

b) Using the TV control stick:

1. Shortly press control stick to enter menu.

2. Press control stick down and navigate cursor to SOURCES menu.

3. Shortly press control stick to enter SOURCES menu.

4. With control stick choose the input/source you require.

5. By short press of control stick, you will change input/source to the

one selected.

TV Menu navigation

Use the (▲/▼/◄/►) remote control buttons to focus on the desired item.

Press the OK button to select the item currently in focus.

Press the BACK button to go back one step in the menu.

Press the EXIT button to leave menu.

Press the (home) button to enter TV Home menu.

To enter Live TV menu, press the TV button and then press the MENU

button.

Automatic brightness adjustment

This TV is equipped with a light sensor which has the ability to adjust the

brightness of the screen depending on the ambient light. When the light

sensor is activated, the TV will increase the brightness of the screen in a

brightly lit room and decrease the brightness in a dark room.

The light sensor is oﬀ by default. To activate this function, press the

(home) button, then select [Settings] - [Device Preferences] - [Picture] and

activate [Auto Brightness].

Note: In HDR and Dolby Vision picture modes, [Auto Brightness] may not

be available.

USB Media playback notice

This TV supports playback of a wide variety of  le types from a USB drive.

However, for data security reasons, Google limit the supported  le system

types.

To playback any media from a USB storage drive, the USB drive must

be formatted to a FAT16 or FAT32  le system. NTFS is not supported.

Electronic instruction manual

Find more useful information directly from your TV.

To launch the online manual, press the (home) button, select Apps

from the Home menu, and select "Instruction Manual" from the apps

list.

NOTE: An Internet connection is required to use this electronic manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp 50EQ6EA Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp 50EQ6EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info