Bedienungsanleitung Sharp AE-X08BE-c (Seite 22 von 183) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

515994

Zoom out

Zoom in

Vorherige Seite

1/183

Nächste Seite

IF THE UNIT FAILS TO RECEIVE THE REMOTE CONTROL SIGNAL

Check whether the remote con-

trol batteries have become old

and weak.

Try to send the signal again with

the remote control pointed prop-

erly towards the unit’s signal re-

ceiver window.

Check whether the remote con-

trol batteries are installed with

the polarities properly aligned.

E-20

BEFORE CALLING FOR SERVICE

The following conditions do not denote equipment malfunctions

UNIT DOES NOT OPERATE

The unit will not operate if it is turned on immediately

after it is turned off. The unit will not operate

immediately after the mode is changed. This is to

protect the internal mechanisms. Wait 3 minutes

before operating the unit.

UNIT DOES NOT SEND OUT WARM AIR

The unit is preheating or de-icing.

CRACKING NOISE

The unit may produce a cracking noise. This sound is

generated by the friction of the front panel and other

components expanding or connecting due to a

temperature change.

If the unit appears to be malfunctioning, check the following points before calling for

service.

IF THE UNIT FAILS TO OPERATE

Check to see if the circuit breaker has tripped or the fuse has blown.

IF THE UNIT FAILS TO COOL (OR HEAT) THE ROOM EFFECTIVELY

Check the filters. If dirty, clean

them.

Check the outdoor unit to make

sure nothing is blocking the air in-

let or outlet.

Check the thermostat is proper

setting.

Make sure windows and doors

are closed tightly.

A large number of people in the

room can prevent the unit from

achieving the desired tempera-

ture.

Check whether any heat-gen-

erating appliances are operat-

ing in the room.

ODORS

Carpet and furniture odors that entered into the unit

and the air conditioner's inner component odors at

the early stage of installation may be sent out from

the unit.

Please call for service when OPERATION Lamp, TIMER Lamp and TEMPERATURE INDICATOR

on the indicator panel blink.

A LOW BUZZ NOISE EMITTED

This is a sound emitted when the unit is generating ion

clusters.

SWISHING NOISE

The soft, swishing noise is the sound of the

refrigerant flowing inside the unit.

WATER VAPOUR

• In the COOL and DRY operation, water va-

pour can sometimes be seen at the air outlet

due to the difference between the room air

temperature and the air discharged by the

unit.

• In the HEAT operation, water vapour may

flow out of the outdoor unit during de-icing.

THE OUTDOOR UNIT DOES NOT

STOP

After stopping the operation, the outdoor unit

will rotate its' fan for about a minute to cool

down the unit.

ODOR EMITTED FROM THE

PLASMACLUSTER AIR OUTLET

This is the smell of ozone generated from the

ionizer. Density of the ozone is very little, hav-

ing no adverse effect over your health. The

ozone released into the air will decompose soon,

and its density in the room will not increase.

During PLASMACLUSTER AUTO OPERATION, the air conditioner operates in the REFRESHING OP-

ERATION even when there is odor in the room.

• In case for example, when the room is full of tobacco smokes before the air conditioner is turned on, the

ODOR SENSOR may become unreactive.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp AE-X08BE-c Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info