516005
19
Zoom out
Zoom in
Vorherige Seite
1/219
Nächste Seite
ENGLISH
1
Press the SELF CLEAN button when the unit is not
operating.
The remote control displays " ".
The red OPERATION lamp ( ) and the blue
PLASMACLUSTER lamp on the unit will light up.
The unit will stop operation after forty minutes.
The remaining operation time will be indicated on the
TEMPERATURE INDICATOR of the indoor unit in
minute decrements.
TO CANCEL
Press the SELF CLEAN button.
Or, turn the unit off by pressing the ON/OFF button.
The red OPERATION lamp ( ),the blue
PLASMACLUSTER lamp and the TEMPERATURE
INDICATOR on the unit will turn off.
E-17
PLASMACLUSTER OPERATION
You can choose PLASMACLUSTER AUTO OPERATION, AIR CLEAN OPERATION or
REFRESHING OPERATION
1
When the unit is in operation, press the
PLASMACLUSTER button to select the mode.
PLASMACLUSTER AUTO AIR CLEAN REFRESHING CANCEL
In the AIR CLEAN operation, the blue
PLASMACLUSTER lamp on the unit will light up.
In the REFRESHING operation, the green
PLASMACLUSTER lamp on the unit will light up.
TO CANCEL
Press the PLASMACLUSTER button until
PLASMACLUSTER symbol on the remote control
display goes off.
The PLASMACLUSTER lamp on the unit will turn off.
NOTE:
You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF
CLEAN operation.
1
SWING
CLEAN
FAN
SET/C
AM
NOTES:
Setting of the PLASMACLUSTER operation will be memorized and will operate in the same
mode, the next time you turn on the air conditioner.
To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
When the PLASMACLUSTER button is pressed while the unit is not operating, the
PLASMACLUSTER operation will be performed without accompanying air conditioning mode
(eg. HEATING or COOLING).The mode symbol of the remote control will go off and the fan
speed can not be set AUTO. At this time, you may feel HEATING is performed with units in other
rooms. Indoor fan will decrease its rotating speed and will ture ON and OFF depending on the
room temperature.
SELF CLEAN OPERATION
1
(only for models AY-XPM7CR/AY-XPM9CR/AY-XPM12CR)
(only for models AY-XPM7CR/AY-XPM9CR/AY-XPM12CR)
SWING
CLEAN
FAN
MODE
SET/C
1h
AM
AUTO
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp AE-XM18CR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info