Bedienungsanleitung Sharp ARM205 (Seite 25 von 96) (Englisch)

26406

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

COPY FUNCTIONS

Press the [AUTO IMAGE] key.

The AUTO IMAGE

indicator lights up and the

appropriate ratio for the

original size and paper

size is selected. (The

indicator of the selected

ratio will light up.)

Set the number of copies and other

copy settings, and then press the

[START] key ( ).

The copy will be delivered to the paper output

tray.

MANUAL RATIO SELECTION

Copies can be reduced down to 25% or enlarged up to 400%. The [PRESET RATIO] selector keys ( , ) can be

pressed to quickly select a ratio from among eight preset ratios. In addition, the [Zoom] keys ( , ) can be

pressed to select the ratio in increments of 1%.

Place the original in the document

feeder tray or on the document glass.

If the original is placed on the document

glass, select the original size. (p.18)

Use the [PRESET RATIO] selector

keys ( , ) and [Zoom] keys ( , )

to select the desired copy ratio.

Selecting a preset ratio

Press the [PRESET

RATIO] selector key ( )

to move up through the

preset ratios.

Press the [PRESET

RATIO] selector key ( )

to move down through

the preset ratios.

Fine adjustment of the

ratio

Any ratio from 25% to

400% can be set in

increments of 1%.

Press a [PRESET RATIO] selector key ( or ) to

set the approximate ratio, then press the [Zoom] keys

( or ) to increase or decrease the ratio.

To decrease or increase the zoom ratio rapidly, hold

down the [Zoom] keys ( or ).

When a [Zoom] key ( or ) is pressed, the ZOOM

indicator will light up and the zoom ratio will appear in

the display for about two seconds.

Set the number of copies and other

copy settings, and then press the

[START] key ( ).

The copy will be delivered to the paper output

tray.

•

If the ORIGINAL SIZE indicator blinks,

change the orientation of the placed original.

• If the copy is made when a PRESET

RATIO selector indicator is blinking, the

copied image may run off the page.

AUTO

IMAGE

Note

To cancel automatic ratio selection, press the

[AUTO IMAGE] key again.

Note

PRESET RATIO

200

100

141

129

121

ZOOM

25 400%

• To verify a zoom setting without changing

the zoom ratio, Hold down the [Copy ratio

display] key ( ). When the key is

released, the display will return to the

number of copies display.

• If the copy is made when a PRESET

RATIO selector indicator or the ZOOM

indicator is blinking, the copied image may

run off the page. To ensure that the image

fits on the page, lower the copy ratio until

the indicator stops blinking and lights

steadily.

• If the PAPER SIZE indicator is not lit, there

is no appropriate paper. Load appropriate

paper in a paper tray (p. 14).

To return the ratio to 100%, press the

[PRESET RATIO] selector key ( or )

until the 100% indicator lights up.

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp ARM205 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp ARM205

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info