Bedienungsanleitung Sharp AX-1110 (Seite 10 von 59) (Englisch)

564739

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

EN – 8

IMPORTANT INSTRUCTIONS

WATER TANK

To fill the water tank with room temperature

water suitable for drinking (filtered) is a must

for cooking with steam. Be sure to follow the

directions below.

1. Pull the water tank toward you to remove. (Figure 1)

2. Wash the water tank and lid for the first time.

3. Fill the water tank with room temperature water

suitable for drinking (filtered) through the lid

to the MAX mark each time you begin to cook.

(Figure 2) Do not fill the water tank over the MAX

mark.

4. Make sure the lid is closed firmly.

5. Install the water tank by pushing firmly. (Figure 3)

6. After cooking, empty the water tank and wash the

water tank and the lid.

NOTES:

1. Do not use any other liquids like distilled water, R.O

water, mineral water and etc.

2. An insufficient amount of water in the water tank

may cause an undesired result.

3. We recommend that you empty the water tank

every time after cooking. Do not leave the water

tank filled with water in the oven over a day.

4. If "Err, WATER (flashing)" is shown in the display

during Steam cooking, refer to Troubleshooting

Chart on page EN-22. The message will not

appear in Descale function.

5. Do not drop or damage the water tank. Heat may

cause the water tank to change shape. Do not use

a damaged water tank. Consult your dealer or an

authorised SHARP service agent.

There may be a few water drops when removing

the water tank. Wipe the oven dry with a soft cloth.

7. Do not block the air holes on the lid of the water

tank. It will cause trouble during cooking.

DRIP TRAY

Be sure to cook with drip tray in position and

follow the directions below.

The drip tray is packed with the oven. Place the drip

tray under the oven door as shown in Figure 4. This

drip tray collects the condensation from the oven door.

To remove the drip tray: Pull the drip tray toward

you with both hands.

* Make sure water is not dripping down before

removing the drip tray.

To replace the drip tray: Place the drip tray onto the

right and left hooks under the oven and push firmly as

shown in Figure 4. Insert the drip tray horizontally when

you attach it. Improper use may cause the damage to the

hooks.

Empty the drip tray after each time you cook.

Empty, rinse thoroughly, dry and replace. Failure to

empty may cause the drip tray to overflow. Cooking

repeatedly without emptying the drip tray may cause it

to overflow.

WARNINGS:

1. The oven will become very hot after cooking and draining water function.

2. Do not open the oven with your face close to the oven. Steam from the oven may cause burns.

Make sure that the oven has cooled before emptying the water tank and the drip tray and then wipe the oven

cavity.

4. Do not touch the water directly as water in the drip tray may be hot.

Figure 2 Figure 3

Figure 1

Figure 4

Read Carefully Before Cooking with Steam

Drip tray

Hooks

AX-1110(IN)W_eng.indd 8AX-1110(IN)W_eng.indd 8 8/13/2013 3:39:46 PM8/13/2013 3:39:46 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp AX-1110 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp AX-1110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info