Bedienungsanleitung Sharp bdhp20h (Seite 50 von 56) (Englisch)

137488

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Square noise (mosaic) appears on the screen.

• Blocks in images may be visible in scenes with rapid

movement due to the characteristics of digital image

compression technology.

Video stops.

• Has the Player been subjected to shock or impact? Are

you using it in an unstable location? The Player will stop if

it senses shock or vibration.

Left and right channels of audio are reversed, or sound

comes out of only one side.

• Are left and right audio cables connected to the opposite

terminal, or is one side disconnected?

Disc does not play back automatically.

• Have you set a disc that has an automatic playback

function?

The Player heats up during use.

• When using this Player, the console cabinet may heat

up depending on the usage environment. This is not a

malfunction.

The Player makes a snapping sound when starting

playback or loading a disc.

• The Player may sometimes make a snapping sound when

starting playback if you have not operated it for a while

or when loading a disc. This is the sound of the Player

operating, and is not a malfunction.

Cannot operate the Player.

• Are you operating the Player within the speciﬁ ed operating

temperature range? (Page 52)

Troubleshooting

NOTE

Reset

• If this Player receives strong interference from a source such as

excessive static electricity, strong external noise, malfunction

of power supply, or voltage caused by lightning during use or a

wrong operation is sent to the Player, errors like the Player not

accepting an operation may occur. Press and hold B (POWER)

on the Player until “ ” appears on the front panel display

when the Player does not operate properly even after the power

has been turned off. Then, after the a (STANDBY) indicator is lit,

turn on the power.

• When a reset is performed while the power is on, the Player will

turn off. Turn the power on again. At this point, it may take a few

moments for the system processing to ﬁ nish before the Player is

ready for use. During the system processing, the BD and DVD/CD

mode indicators on the front panel display of the Player will blink.

Once the system processing has ﬁ nished, the indicators will ﬁ nish

blinking and then light up normally. You can operate the Player

when the BD and DVD/CD mode indicators are lit.

• Since all settings including the language setting stored in memory

are also reset when a reset has been performed, they must be set

again.

• When the problem persists even after performing a reset, unplug

the AC cord and plug it in again. If this does not solve the problem,

contact the nearest service centre approved by SHARP.

STANDBY indicator will remain lit.

• When the AC cord is removed from the outlet, the STANDBY

indicator will remain lit for a short period. This is normal and is not

a malfunction.

The following conditions do not always denote trouble. Therefore, perform the checks described below before calling for service. If the

problem cannot be corrected by the use of this guide, remove the main plugs from the wall socket, and contact the dealer or supplier from

whom the unit was purchased in order to obtain service. Where this is not possible

please visit our web-site www.sharp.co.uk/customersupport.

Customers without Internet access may telephone 08705 274277 during ofﬁ ce hours (or (01) 6760648 if telephoning from Ireland),

Certain replacement parts and accessories may be obtained from our main parts distributor, who can be contacted on the following

numbers:

WILLOW VALE ELECTRONICS LTD.:

0121 766 5414

In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of the date of purchase to

the repairing company. Please keep your invoice or receipt, which is supplied at the time of purchase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp bdhp20h Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info