Bedienungsanleitung Sharp cd mpx 500 h (Seite 34 von 48) (Englisch)

160641

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

03/12/17 CD-MPX200H_500H EN.fm

E-31

ENGLISH

CD-MPX200H3

CD-MPX500H

CD-MPX200H

Advanced Features

Using the Radio Data System (RDS) (continued)

To stop the ASPM operation before it is complete:

Press the RDS ASPM button whilst it is scanning for stations.

The stations which are already stored in memory will be kept there.

Notes:

 If the same station is broadcasting on different frequencies, the

strongest frequency will be stored in memory.

 Any station which has the same frequency as the one stored in

memory will not be stored.

 If 40 stations have already been stored in memory, the scan will

be aborted. If you want to redo the ASPM operation, erase the

preset memory.

 If no stations have been stored in memory, “END” will appear for

about 4 seconds.

 If the RDS signals are very weak, station names may not be

stored in memory.

To erase all of the contents of preset memory:

To store a station name again if the wrong name was stored in

memory:

It may be impossible to store station names in memory using the

ASPM function if there is lots of noise or if the signal is too weak. In

this case, perform as follows.

Notes:

 The same station name can be stored in different channels.

 In a certain area or during certain time periods, the station names

may temporarily be different.

 Notes for RDS operation

If any of the following events occur, it does not mean that the

unit is faulty:

 “PS”, “NO PS” and a station name appear alternately, and the unit

does not operate properly.

 If a particular station is not broadcasting properly or a station is

conducting tests, the RDS reception function may not work

properly.

 When you receive an RDS station whose signal is too weak,

information like the station name may not be displayed.

 “NO PS”, “NO PTY” or “NO RT” will flash for about 5 seconds, and

then the frequency will be displayed.

Notes for radio text:

 The first 10 characters of the radio text will appear for 4 seconds

and then they will scroll across the display.

 If you tune in to an RDS station which is not broadcasting any

radio text, “NO RT” will be displayed when you switch to the radio

text position.

 Whilst radio text data is received or when the text contents

change, “RT” will be displayed.

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 Whilst pressing down the button and the button, press

the TUNER (BAND) button until “TUNER CL” appears.

 After performing this operation, all of the preset memory

information will be erased.

1 Press the PRESET

( or ) button to check whether the names

are correct.

2 If you find a wrong name during receiving the station, wait until the

correct name will be displayed. And then press the MEMORY

button.

3 Within 30 seconds, press the MEMORY button whilst the preset

channel number is flashing.

 The new station name has been stored in memory correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp cd mpx 500 h Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info