Bedienungsanleitung Sharp DR-450 (Seite 6 von 42) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679538

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Alarms

When the <Alarms> appears,

1. Press ENTER/SCAN button to enter the alarm setting screen.

2. Choose <Alarm 1: o > or <Alarm 2: o >, press the ENTER/SCAN

button to set the alarm On.

3. Using the ◄/► button to select the alarm time, press ENTER/SCAN

to con rm.

4. Select the alarm days: Daily, Once, Weekdays, Weekends.

5. Set the alarm mode: DAB, FM, Buzzer.

6. Set the alarm volume: there is a slide bar adjusting the alarm volume,

press ◄/► button to increase or decrease the volume level, press

ENTER/SCAN button to con rm.

7. After all the above settings, enter the Save screen, press ENTER/SCAN

button to save the alarm.

8. To cancel the alarms, enter the alarm setting screen, press ENTER/

SCAN button to select O and then enter save screen to save the alarm

o setting.

Sleep (Set sleep time)-brie y press SLEEP button

Enter the Sleep time setting screen to select the sleep time:

o /15/30/45/60/90 minutes.

Language (Set the system language)

Enter Language setting screen, use the ◄/► and ENTER/SCAN buttons to

set the system language.

Backlight

Enter Backlight setting screen, using the ◄/► button to select your

desired display backlight level: 3, 2, 1, o . Then press the ENTER/SCAN

button to con rm your selection.

Factory reset

To set the radio to the original settings, enter the Factory reset screen,

follow the tips <Factory reset?>, choose <YES> to reset, and the radio will

be restarted.

SW version

To check the software version of the system.

Prune the stations (only available in DAB/DAB+

mode)

To remove stations that listed but are unavailable.

Enter the Prune screen, use the ◄/► button to select <Yes> or <No>, then

press the ENTER/SCAN button to con rm your selection. The unavailable

stations now be deleted if you chose <Yes>.

Station order (only available in DAB/DAB+ mode)

Enter the Station order screen, use the ◄/► button to select one of the

station orders, then press the ENTER/SCAN button to con rm.

DAB/DAB+ Operations

After turn on the radio, press the MODE/STANDBY button repeatedly to

select and enter DAB/DAB+ mode.

Scan Stations

When turning on to DAB/DAB+ mode, the radio will automatically scan the

stations it found in this area.

Press the ◄/► button to select the previous or next stations, then press

the ENTER/SCAN button to activate to play the station.

Station Tuning

Long press the INFO/MENU button, when the <Station scan> appears,

press the ENTER/SCAN button, then use the ◄/► button to cycle through

the scanning options: <Full scan>, <Manual tune>.

1. Select the <Full scan>, and then press ENTER/SCAN button to enable

full scanning.

2. Select the <Manual tune> and press ENTER/SCAN button, use ◄/►

button to select stations from 5A:174.928MHz to 13F:239.200MHz.

Then press ENTER/SCAN button to activate the selected station.

Store Stations

It is possible to store up to 10 of your favourite DAB stations. This will

enable you to access your favourite stations quickly & easily.

1. To store a preset, you must  rst be listening to the station you would

like to save.

2. Press the PRESET button.

3. Use the ◄/► button to select desired preset number 1-10.

4. Press and hold the ENTER/SCAN button to con rm.

Recall A Stored Station

Once you have saved the stations to the preset stations. You can recall by

pressing the PRESET button.

Press the ◄/► button to select the stored stations, and press ENTER/

SCAN button to con rm.

Display Mode

Every time you press the INFO/MENU button, the display will cycle

through the following display modes:

The information is displayed on the lower segment of the LCD display.

Dynamic Label Segment (DLS)

Displays scrolling text information supplied by the broadcaster.

PTY (Programme Type)

Shows the type and description of the programme provided by the DAB/

DAB+ station.

Bit Rate

The data rate which the signal is being transmitted.

Frequency

Displays the station's transmission channel number and frequency.

Time and Date

Displays the time and date information provided by the broadcaster.

NOTES: DAB-unlike normal radio, groups together several

radio stations and transmits them on one frequency.

FM Operations

Switch to FM mode by pressing the MODE/STANDBY button.

Select Stations

To search for an FM station from 87.5 to 108.00MHz.

1. Press the ◄ or ► button to skip to go back or go forward the

frequency by the step of 0.05MHz.

2. Long press the ◄ or ► button to skip to the previous or next station

of the strongest reception. Once a station has been found, it stops

scanning automatically. If no station is found, it will stop after it has

cycled through the entire frequency.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp DR-450 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp DR-450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info