Bedienungsanleitung Sharp DR-450 (Seite 3 von 44) (Alle Sprachen)

679538

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH

Before using your product, read all safety instructions. For full instructions

please refer to the user guide available to download from the website www.

sharpconsumer.eu.

Panels & Controls

-1. Front Panel

1. MODE/ – Press to turn on the radio, or switch to Standby mode, or

change the mode DAB/DAB+, FM, Bluetooth.

2. Volume Knob/EQ/SNOOZE – Use to adjust the volume level, or

change the sound e ects: Classic, Rock, Pop, Jazz, Dance, Live and O ,

or activate the snooze function.

3. SLEEP – Press to activate the sleep timer: o /15/30/45/60/90 minutes.

4. INFO/MENU – Press to view the station information, or enter main

menu setting screen.

5. ENTER/SCAN – Use to con rm the selection, or scan the stations.

6. PRESET – Press to recall the preset stations.

7. PREVIOUS ◄ – Press to go back to the last selection, or decrease the

frequency, or seek the last strongest station.

8. NEXT ► – Press to go forward to the next selection, or increase the

frequency, or seek the next strongest station.

9. DISPLAY SCREEN – To show the information.

-2. Rear Panel

10. Telescopic Aerial – To receive the FM signal.

11. DC Power Input – DC 5V

General Operating Instructions

Mains Adaptor (supplied with the package)

Connect the mains adaptor to the DC power socket on the rear panel of

the radio.

Turn On the Radio

Press the MODE/STANDBY button to turn on the radio.

Switch to Standby Mode

When in use, long press the MODE/STANDBY button to enter Standby

mode. Press it again to wake up the radio.

The  rst time the radio is used

The  rst time you turn the radio on it will automatically scan for stations.

Snooze function

When the alarm is sounding in Standby mode, rotate the Volume Knob to

activate the SNOOZE function.

Time Auto Update

The time and date can be updated automatically if the system detects the

RDS signal. If the RDS signal is weak or cannot be detected, the time will

not automatically update.

Main Menu Setting

Long press the INFO/MENU button to enter the main menu setup screen.

Find and enter the <System> screen by pressing the ENTER/SCAN button.

Then use the ◄/► button to cycle through the menu options: <Time

setup>, <Alarms>, <Sleep>, <Language>, <Prune>, <Station Order>,

<Backlight>, <Factory reset>, <SW version>.

NOTE: The <Prune> and < Station Order> are only available in DAB mode.

Select one of the options and then press the ENTER/SCAN button to

access that menu.

Alarms

When the <Alarms> appears,

1. Press ENTER/SCAN button to enter the alarm setting screen.

2. Choose <Alarm 1: o > or <Alarm 2: o >, press the ENTER/SCAN

button to set the alarm On.

3. Using the ◄/► button to select the alarm time, press ENTER/SCAN

to con rm.

4. Select the alarm days: Daily, Once, Weekdays, Weekends.

5. Set the alarm mode: DAB, FM, Buzzer.

6. Set the alarm volume: there is a slide bar adjusting the alarm volume,

press ◄/► button to increase or decrease the volume level, press

ENTER/SCAN button to con rm.

7. After all the above settings, enter the Save screen, press ENTER/SCAN

button to save the alarm.

8. To cancel the alarms, enter the alarm setting screen, press ENTER/

SCAN button to select O and then enter save screen to save the alarm

o setting.

DAB/DAB+ Operations

Scan Stations

When turning on to DAB/DAB+ mode, the radio will automatically scan the

stations it found in this area.

Press the ◄/► button to select the previous or next stations, then press

the ENTER/SCAN button to activate to play the station.

Station Tuning

Long press the INFO/MENU button, when the <Station scan> appears,

press the ENTER/SCAN button, then use the ◄/► button to cycle through

the scanning options: <Full scan>, <Manual tune>.

1. Select the <Full scan>, and then press ENTER/SCAN button to enable

full scanning.

2. Select the <Manual tune> and press ENTER/SCAN button, use ◄/►

button to select stations from 5A:174.928MHz to 13F:239.200MHz.

Then press ENTER/SCAN button to activate the selected station.

FM Operations

Switch to FM mode by pressing the MODE/STANDBY button.

Select Stations

To search for an FM station from 87.5 to 108.00MHz.

1. Press the ◄ or ► button to skip to go back or go forward the

frequency by the step of 0.05MHz.

2. Long press the ◄ or ► button to skip to the previous or next station

of the strongest reception. Once a station has been found, it stops

scanning automatically. If no station is found, it will stop after it has

cycled through the entire frequency.

Tuning Stations

1. Long press the ENTER/SCAN button to scan the stations. During

scanning, the screen will display a slide bar that indicate the progress of

the scan and the amount of radio stations that have been found so far.

Once the scan has  nished, the radio will play the  rst station it found.

Store Stations

It is possible to store up to 10 of your favourite FM/DAB stations. This will

enable you to access your favourite stations quickly & easily.

1. To store a preset, you must  rst be listening to the station you would

like to save.

2. Press the PRESET button.

3. Use the ◄/► button to select desired preset number 1-10.

4. Press and hold the ENTER/SCAN button to con rm.

Sharp DR-450 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp DR-450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info