787620
19
Zoom out
Zoom in
Vorherige Seite
1/172
Nächste Seite
EN
Note: If the time is not set or has failed to update
from the radio signal, <Time is not set> will be
displayed when you try to set the alarm. The radio will
then prompt you to set the time. An alarm can only
be set after the time has been set.
If you try to set alarm when the unit is powered by
batteries, <Alarm inactive> will be displayed. Alarm
functions are only available with mains power (USB).
Stop, snooze, or switching the alarm
o
To stop the alarm, short press ,<Alarm o>
will be displayed. The alarm symbol will remain in the
display and will sound again at the same time the
next day unless it was set for <Once>.
To snooze the alarm, press . <Snooze> will be
displayed, followed by a 10-minute countdown. Once
the countdown ends, the alarm will sound again. You
can terminate snooze by pressing . <Alarm o>
will be displayed.
To switch o the alarm, follow the steps for ‘Set an
alarm’ and select <O>.
Sleep timer
You can set your radio to switch to standby mode
automatically using the sleep timer. You can choose
from <Sleep o>, <15>, <30>, <45>, <60> and
<90> minutes. To do this, long press . Use
to scroll and select <System> / <Sleep>.
Use to scroll and select your preference.
<Sleep> will be displayed. In the top right of the
radio display, the number of minutes until your radio
will switch to standby mode will be displayed e.g.,
S90.
Display backlight timeout
To adjust the display backlight timeout, long press
. Use to scroll to and select <System>
/ <Backlight> / <Timeout>. Scroll through the
available backlight timeout options. The current
setting will have an asterisk (*) in the display. Press
to select.
Similarly, use to change the settings for
the backlight brightness for the <Dim level> and
<On level>. There are 3 options available: <High>,
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp DR-P420 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info