Bedienungsanleitung Sharp DVHR300u (Seite 21 von 126) (Englisch)

21204

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Operating a TV Using the

Remote Control

(

Universal Remote Control

)

The Universal Remote Control may operate the

basic functions of 21 different types of TVs.

To enter the Manufacturer’s Code for your TV,

follow the instructions below.

There is no guarantee that the universal

remote control will function with your TV.

Setting the

Manufacturer’s Code

Press POWER and CH ' of TV

CONTROL simultaneously.

Enter the 2-digit Manufacturer’s

Code with the Number buttons

(Ex. 02-“0”, “2”) within 10

seconds after releasing POWER

and CH ' of TV CONTROL.

Point the remote control unit

towards the TV and then press

POWER of TV CONTROL.

• If the TV turns on/off, setup was

successful. If not, repeat the proce-

dure using another code.

See the list below for the Manufacturer’s Code

and the buttons which work with each brand.

Major Components

Setting the Remote

Control Code

• Two types of remote control codes operate

this Recorder: RC-1 and RC-2. If you

operate this Recorder by remote control

along with another SHARP DVD recorder or

DVD player placed next to it simulta-

neously, switching the remote control code

(both the Recorder and remote control) to

one of the signals (RC-1 or RC-2) will let

you operate only with this Recorder.

• Make sure to set the Recorder and remote

control to the same remote code. You can

not operate the Recorder if they are not set

to the same code.

Setting the Remote Con-

trol Code of the Remote

Example: Setting the code to “RC-2”.

Press and hold POWER and 2

together for more than 5 seconds.

Press POWER of this Recorder to

see if you can turn it on/off.

• If you cannot, go to step

NOTE

• The remote control code of the remote

becomes “RC-1” when you change the

batteries.

Setting the Remote Con-

trol Code of the Recorder

Press POWER to turn off the

Recorder.

Press and hold CHANNEL" and

' on the Recorder together for

more than 5 seconds.

• Each time this operation is performed,

the code of the Recorder toggles

between “RC-1” and “RC-2”. The front

panel display changes as the code

changes.

• Press POWER on the remote control

to see if you can turn on/off the

Recorder.

If remote control does not

work

Press POWER on the remote control and

check the front panel display (RC-1 or RC-2).

Set the remote control code according to the

display and press POWER to see if you can

turn on/off the Recorder.

Brand

EMERSON

FISHER

FUNAI

GOLDSTAR

HITACHI

JVC

MAGNAVOX

MITSUBISHI

PANASONIC

PIONEER

RCA

SAMSUNG

SANYO

SHARP

SONY

TECHNOL ACE

TOSHIBA

ZENITH

Code

07, 09

13, 21

07, 09

POWER

VOL /

INPUT

—

Buttons on the Remote

NOTE

• If the batteries in the remote control unit are

changed, the code settings must be re-

entered.

• Some brands have more than one code

listed above, due to changes in the codes.

In such cases, try another code to find the

code that operates your TV.

CHANNEL

' /

Front display

panel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp DVHR300u Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info