Bedienungsanleitung Sharp DVRW340U (Seite 36 von 112) (Englisch, Spanisch)

21208

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

PROG. 1

PROG. 2

Actual

recording

The first 30 seconds (at the longest) will be cut off.

PROG. 2PROG. 1

When the End time of the programming currently being recorded and the Start time

of the subsequent program are same:

If PROG. 1 is a DVD recording program, the beginning of the PROG. 2 may be cut off.

The amount of time cut off differs depending on the recorded media.

For example, if both PROG. 1 and PROG. 2 are DVD recordings, the first 30 seconds (at the longest) will be cut off PROG.

PROG. 1

PROG. 2

Actual

recording

PROG. 2

When the recording time is entirely overlapped:

However, if you turn the power off for timer standby within 2 minutes to

the Start time for PROG. 1, PROG. 1 will be recorded first, and the

recording of PROG. 2 will start after the recording of PROG. 1 is completed.

PROG. 1

PROG. 2

Actual

recording

PROG. 2 PROG. 1

When the recording time is partially overlapped:

PROG. 1 will start after PROG. 2 is complete to be recorded.

However, PROG. 1 will be recorded if you turn the power off for timer standby within 2 minutes

to the Start time for PROG. 1.

The first 30 seconds (at the longest) will be cut off

PROG. 1

ex.1

PROG. 2

Actual

recording

PROG. 1 PROG. 2

PROG. 1

PROG. 2

Actual

recording

PROG. 1 PROG. 2

PROG. 3

ex. 2

A programming set previously has priority

When the starting time is the same:

A program set previously (PROG. 1) has priority.

When some programming have been

made at the end time of the

programming currently being recorded:

A program set previously (PROG. 2) has priority.

The first 30 seconds (at the longest) will be cut off The first 30 seconds (at the longest) will be cut off

Hints for timer recording

•

If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.

Please insert a recordable disc.

• If a videotape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and

timer recording cannot be performed. Please insert a recordable videotape.

• When all the timer recording is completed, the indicator flashes.To play or eject the recorded disc (or the video-

tape), press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT CA

) button.

• The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same

channel and time both in DVD and VCR, the programming that has priority will be recorded.

•

During timer recording or timer standby ( indicator is on the front display), any operations on the unit will not be

available.To make these operations available, cancel the timer recording or timer standby first ( indicator disappears).

• To cancel the timer standby mode, press POWER button.

• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc

reaches at the end during the recording, the unit turns itself off.

•

When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.

•

If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording

standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.

• If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off.

• When two or more programs are overlapped,“Overlap” will appear in the display.

•

If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.

This unit records the programs according to priority if the timer programmings are overlapped.The timer programming

set previously has priority.

A timer recording of lower priority will be canceled, start from the middle or stop on the way.

Check the overlapped timer programmings and change the priority if necessary.

The priority of overlapped settings

Timer recording (cont’d)

Recording

Note

• When the recording time of

two programs are overlapped,

or the End time of a program

and the Start time of another

is the same, the first 30 sec-

onds (at the longest) of the

subsequent program will be

cut off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp DVRW340U Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info