–
16
–
EN
Language options are not available with some discs.
Press
SETUP in STOP mode.
Press s or B to select
(CUSTOM), then press ENTER.
• On screen menu will appear.
Press s or B to select (LAN-
GUAGE), then press ENTER to
confirm.
Press K or L to select the below items, then press
ENTER.
AUDIO :
• Sets the audio language.
SUBTITLE :
• Sets the subtitle language.
DISC MENU :
• Sets the language for DVD Menu.
PLAYER MENU :
• Sets the language for the On-Screen display.
• You can also adjust the setting from (QUICK) setup
menu.
Press K or L to select a setting, then press ENTER.
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language. (Refer to the language
code below.)
• Only the languages supported by the disc can be
selected.
Press SETUP to exit.
NOTE:
• Language Setting for Audio and Subtitle is not available
with some discs. Then use AUDIO and SUBTITLE.
Details are on pages 13 and 14.
6
5
4
3
2
1
Language Setting
DVD SETUP
Display Setting
You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of
the DVD player.
Press
SETUP in STOP mode.
Press s or B to select (CUSTOM), then press ENTER.
• On screen menu will appear.
Press s or B to select (DISPLAY), then ENTER to
confirm.
Press K or L to select the below items, then
press ENTER.
TV ASPECT :
• Press K or L for an item
selection, then press ENTER.
• Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
• Select 4:3 PAN & SCAN for a
full height picture with both sides trimmed.
PAN & SCAN is only available on DVDs recorded with
this option, if not LETTER BOX mode will be used.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
• The default setting is 4:3 LETTER BOX.
• You can also adjust the setting from (QUICK) setup
menu.
STILL MODE :
• Press K or L for an item selection (AUTO, FIELD, or
FRAME), then press ENTER.
• This adjusts the resolution of still pictures.
• AUTO is normally selected (default).
• If you select FIELD, still pictures will be stabilized
although they will be coarse due to little amount of
data.
• If you select FRAME, still pictures will be highly defined
although they will be blurred due to output of two fields
at the same time.
ANGLE ICON :
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
• The default setting is ON.
AUTO POWER OFF :
• Press ENTER repeatedly to turn Auto Power off ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
PROGRESSIVE :
• Press K or L to set PROGRESSIVE to ON or OFF,
then press ENTER.
• The setting will be effective when you exit the setup
screen by pressing SETUP.
• When PROGRESSIVE is ON, “P.SCAN” appears on
the DVD player’s display.
• The default setting is OFF.
• Refer to page 6 for more details.
PANEL DISPLAY :
• Press K or L for an item selection BRIGHT, DIMMER
or AUTO, then press ENTER.
• This adjusts the brightness of the display panel with the
factory default BRIGHT.
• When AUTO is selected, the display dims only during
playback.
Press
SETUP to exit.
NOTE:
• Be sure to press SETUP, or the setting will not work.
5
4
3
2
1
