Bedienungsanleitung Sharp ER-A280 (Seite 3 von 188) (Englisch)

526658

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

INTRODUCTION

Thank you very much for your purchase of the SHARP Electronic Cash Register Model ER-A280F/A280N.

Please read this manual carefully before operating your machine in order to gain full understanding of

functions and features. Please keep this manual for future reference. It will help you if you encounter any

operational problems.

IMPORTANT

• Install your register in a location that is not subject to direct sunlight, unusual temperature

changes, high humidity or exposure to water sources and keep away from heat and magnetic

sources.

Installation in such locations could cause damage to the cabinet and the electrical components.

• The register should not be operated by an individual with wet hands.

The water could seep into the interior of the register and cause component failure.

• Do not apply excessive pressure to the display.

Do not use a sharp-pointed object on the display.

The LCD display will be damaged easily.

• When cleaning your register, use a dry, soft cloth. Never use solvents, such as benzene and/or

thinner.

The use of such chemicals will lead to discoloration or deterioration of the cabinet.

• The surface of the screen may become smeared and accumulate dust during use.

Gently wipe the surface of the screen with a soft cloth that has been dipped in a mild detergent solution

and squeezed dry.

• The register plugs into any standard wall outlet (official (nominal) voltage).

Other electrical devices on the same electrical circuit could cause the register to malfunction.

• If the register malfunctions, call your authorized SHARP dealer for service - do not try to repair the

• For a complete electrical disconnection, the AC power cord must be removed from the wall outlet.

PRECAUTION

This register has a built-in memory protection circuit which is operated by a rechargeable battery pack. It

should be known that all batteries will, in time, dissipate their charge even if not used. Therefore to insure an

adequate initial charge in the protection circuit and to prevent any possible loss of memory upon installation,

it is recommended that each unit be allowed to be recharged for a period of 24 to 48 hours prior to use by

the customer.

In order to charge the battery pack, the machine must be plugged in. This recharging precaution can

prevent unnecessary initial service calls.

The battery pack is a consumable part, and its operating time will get shorter gradually each time it is

recharged for memory backup.

When the battery pack cannot be charged enough to perform memory backup, it indicates that the service

life of the battery pack has expired.

If this is the case, consult your authorized SHARP dealer.

ER-A280F_N(SEEG)(E)-1 09.6.15 3:56 PM Page 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp ER-A280 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp ER-A280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info