Bedienungsanleitung Sharp FOB1600 (Seite 113 von 120) (Englisch)

16833

113

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

111

SHARP

Revised date: .

Issued date :Sep.19.2002

MATERIAL SAFETY DATA SHEET (2/3)

MSDS No. B-1028

Section 5. First Aid Measures

Inhalation: Remove to fresh air. Seek medical attention if breathing becomes difficult.

Ingestion: Immediately rinse mouth out with plenty of water. If within 30 minutes after ingestion, give

victim a small glass of water or milk (NEVER give anything by mouth to an unconscious

person). Contact physician or poison center. Do not induce vomiting unless instructed to

do so by a physician or poison center.

Skin Contact: Remove contaminated clothing. Flush affected area with water. Seek medical attention

if irritation develops and persists.

Eye Contact:

Flush immediately with plenty of water. Remove contact lenses and continue flushing for at least

15 minutes. Seek medical attention if irritation develops and persists.

Section 6. Fire Fighting Measures

Flash Point: Not applicable

Flammability Limits(%): Not applicable

Extinguishing Media: Water, foam, carbon, dioxide or dry chemical.

Fire fighting: Fire may produce small amounts of hazardous decomposition products such as

carbon dioxide, carbon monoxide, and unidentified organics. NIOSH approved

self-contained breathing apparatus may be required if a large volume of ink is

involved.

Fire and Explosion Hazard: No unusual fire or explosion hazards are known for this product.

Hazardous Combustion Products: Oxides of carbon, organic acids, low molecular weight organics.

Section 7. Accidental Release Measures

Occupational Spill: Absorb small ink spills with cloth or paper towels or other suitable material.

Place in a container for disposal. For large spills, dike around spill with absorbent

material.

Transfer contaminated diking material to separate, suitable containers for recovery

or disposal.

Ventilate area and wash spill site after material pickup is complete.

Unless specifically permitted, keep waste out of sewers, watershed and waterways.

Section 8. Handling and Storage

STOREINCOOL,DRYPLACE

Section 9. Exposure Control/Personal Protection

Ventilation: Mechanical room ventilation

Eye Protection: None needed for intended use in printer.

Protective Clothing: None needed for intended use in printer.

Gloves: None needed for intended use in printer.

Section 10. Physical Chemical Characteristics

Description: Black liquid with faint odor. Freezing Point: Approx. -12 to -150

Pressurized: No pH: 7.0-8.5

Water Solubility: Fully Miscible Percent Volatile: Approx. 18.7

Evaporation Rate Specific Gravity: Approx. 1.0 mg/I

(Butylacetate=1): Approx. 3.5 Vapor Density (Air=1): Approx. 1.6

Section 11. Stability and Reactivity

Stability: None known.

Incompatibilities: None known.

Thermal decomposition products: Oxides of carbon, acid gases, low molecular weight organics.

Hazardous polymerization: This product will not polymerize.

all.bookPage111Monday,November25,200211:40AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp FOB1600 Seite 113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info