Bedienungsanleitung Sharp HT-SB150 (Seite 10 von 68) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679557

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

While in HDMI ARC/OPTICAL mode, if

there’s no sound output from the unit,

you may need to activate PCM signal

output on your source device (eg. TV, DVD

or Blu-ray player).

Bluetooth Operation

Pair Bluetooth-enabled Devices

The  rst time you connect your Bluetooth

device to this player, you need to pair

your device to this player.

NOTE:

 The operational range between this

player and a Bluetooth device is

approximately 8 meters (without any

object between the Bluetooth device

and the unit).

 Before you connect a Bluetooth device

to this unit, ensure you know the

device’s capabilities.

 Compatibility with all Bluetooth de-

vices is not guaranteed.

 Any obstacle between this unit and

a Bluetooth device can reduce the

operational range.

 If the signal strength is weak, your

Bluetooth receiver may disconnect,

but it will re-enter pairing mode

automatically.

1. Turn on the soundbar by pressing the

standby button.

2. Press the

button on the unit

repeatedly or BT button on the remote

control to select Bluetooth mode. You

are in bluetooth mode when you see

letters BT  ashing on the display.

3. Enter the Bluetooth search mode on

the device you wish to connect to the

soundbar.

4. Select Sharp HT-SB150 from the list.

5. Your device and the soundbar will

now be connected.

– To disconnect your device, switch o

the Bluetooth connection or hold down

button on the remote control for 3

seconds.

TIPS:

• Enter „0000“ for the password if

necessary.

• The player will also be disconnected

when your device is moved beyond the

operational range.

• If you want to reconnect your device

to this player, place it within the opera-

tional range.

• If the device is moved beyond the

operational range, when it is brought

back, please check if the device is still

connected to the player.

• If the connection is lost, follow the

instructions above to pair your device

to the player again.

Listen to Music from Bluetooth

Device

 If the connected Bluetooth device

supports Advanced Audio Distribution

Pro le (A2DP), you can listen to the

music stored on the device through the

soundbar‘.

 If the device also supports Audio Video

Remote Control Pro le (AVRCP), you

can use the soundbar‘s remote control

to play music stored on the device.

1. Pair your device with the player.

2. Play music via your device (if it

supports A2DP).

3. Use supplied remote control to control

play (if it supports AVRCP).

 To pause/resume play, press the

button on the remote control.

 To skip to a track, press the

buttons on the remote control.

Troubleshooting

To keep the warranty valid, never try

to repair the system yourself. If you

encounter problems when using this unit,

review the following before requesting

service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp HT-SB150 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info