Bedienungsanleitung Sharp HT-SBW110 (Seite 8 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

679556

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Connect to Subwoofer

NOTE:

• For optimal sound, use the supplied Subwoofer only.

• Connect only speakers with impedance that is the same or higher than

the supplied speakers. Refer to the Speci cations section of this manual.

Connect to Power

• Before connecting the AC power cord, ensure you have completed all

other connections.

• Risk of product damage! Ensure that the power supply voltage corres-

ponds to the voltage printed on the back or the underside of the unit.

• Connect the mains cable to the AC~ Socket of the unit and then into a

mains socket.

Basic Operation

Standby/ON

• When you  rst connect the unit to the main socket, the unit will be in

STANDBY mode. The POWER indicator will light up red.

• Press the

button on the remote control to switch the main unit ON

or OFF.

• Disconnect the main plug from the main socket if you want to switch the

unit o completely.

 If a TV or an external device (Only for AUX socket) is connected, the unit will

switch on automatically when the TV or the external device is switched on.

 When the unit has no input signal for over 15 minutes, it will automati-

cally switch to Standby mode.

Select Modes

Press the button on the unit repeatedly or press the AUX, BT

(Bluetooth), OPTICAL, HDMI ARC buttons on the remote control to select

the desired mode.

•

Red indicator: In STANDBY mode.

•

Green indicator: In AUX mode.

•

Orange indicator: In Optical mode.

•

Blue indicator: In Bluetooth mode.

•

White indicator: In HDMI ARC mode.

Adjust the Volume

 Press the + / - buttons on the unit or press the VOL+ / VOL- buttons on

the remote control to adjust the volume.

 If you wish to turn the sound o , press the MUTE button on the remote

control. Press the MUTE button again or press the VOL+ / VOL- buttons

on the unit or on the remote control to resume normal listening.

 While adjusting the volume, the status indicator  ashes quickly.

 While the volume level reaches its maximum level, if you press the VOL+

button again, the status indicator  ashes once. While the volume level

reaches its minimum level, if you press the VOL- button again, the status

indicator  ashes once.

Select Equaliser (EQ) E ect

• While playing, press the NEWS or MOVIE or MUSIC buttons on the remo-

te control to select between preset equalisers: Movie (recommended

for viewing movies), Music (recommended for listening to music), NEWS

(recommended for listening to NEWS).

AUX/OPTICAL/HDMI ARC

1. Ensure that the unit is connected to the TV or audio device.

2. While in ON mode, press the

button on the unit repeatedly or press

the AUX, OPTICAL, HDMI ARC buttons on the remote control to select

the desired mode.

3. Operate your audio device directly for playback features.

4. Press the VOL +/– button to adjust the volume to your desired level.

TIP:

While in HDMI ARC/OPTICAL mode, if there’s no sound output from the

unit and the HDMI ARC/OPTICAL lights  ashes quickly, you may need to

activate PCM signal output on your source device (eg. TV, DVD or Blu-ray

player).

Bluetooth Operation

Pair Bluetooth-enabled Devices

The  rst time you connect your Bluetooth device to this player, you need to

pair your device to this player.

NOTE:

 The operational range between this player and a Bluetooth device is

approximately 8 meters (without any object between the Bluetooth

device and the unit).

 Before you connect a Bluetooth device to this unit, ensure you know the

device’s capabilities.

 Compatibility with all Bluetooth devices is not guaranteed.

 Any obstacle between this unit and a Bluetooth device can reduce the

operational range.

 If the signal strength is weak, your Bluetooth receiver may disconnect,

but it will re-enter pairing mode automatically.

1. While in ON mode, press the (Bluetooth) button on the remote control

or on the unit to select Bluetooth mode. The Blue indicator will light

 ash.

2. Activate your Bluetooth device and select the search mode. “HT-

SBW110” will appear on your Bluetooth device list.

 If you cannot  nd the unit, press and hold the "

/ PAIR" button on the

remote control to be searchable. After the “Pairing” voice prompt and the

Blue indicator will  ash rapidly.

3. Select “HT-SBW110” in the pairing list. After the “Paired” voice prompt,

the system is successfully connected and the Blue indicator will light

up solidly.

4. Begin playing music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can:

 Switch to another function on the unit.

 Disable the Bluetooth function on your device.The device is successfully

disconnected from the unit after the “Disconnected” voice prompt.

 Press and hold the “

/ PAIR” button on the remote control.

TIPS:

• Enter "0000" for the password if necessary.

• If no other Bluetooth device pairs with this player in 2 minutes, the

player will reconnect to the previous connection.

• The player will also be disconnected when your device is moved beyond

the operational range.

• If you want to reconnect your device to this player, place it within the

operational range.

Sharp HT-SBW110 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info