Bedienungsanleitung Sharp HT-SBW460 (Seite 9 von 52) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

745386

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

2. Activate your Bluetooth device and select the search mode.

“SHARP HT-SBW460” will appear on your Bluetooth device list.

 If you cannot  nd the unit, press and hold the button on the remote

control or button on the unit to be searchable. The display will show

“PAIR” and you will hear "Pairing" from the unit.

3. Select “SHARP HT-SBW460” in the pairing list. After successful pairing,

you will hear "Paired" from the unit, and the display panel shows “BT”.

4. Play music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can:

 Switch to another function on the unit.

 Disable the function from your Bluetooth device.The Bluetooth device

will be disconnected from the unit after the “Disconnected” voice

prompt.

 Press and hold the button on the remote control or button on the

unit.

TIPS:

• Enter "0000" for the password if necessary.

• If no other Bluetooth device pairs with this player within two minutes,

the player will recover its previous connection.

• The player will also be disconnected when your device is moved beyond

the operational range.

• If you want to reconnect your device to this player, place it within the

operational range.

• I f the device is moved beyond the operational range, when it is brought

back, please check if the device is still connected to the player.

• If the connection is lost, follow the instructions above to pair your device

to the player again.

Listen to Music from Bluetooth Device

 If the connected Bluetooth device supports Advanced Audio Distri-

bution Pro le (A2DP), you can listen to the music stored on the device

through the player.

 If the device also supports Audio Video Remote Control Pro le (AVRCP),

you can use the player's remote control to play music stored on the

device.

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP).

3. Use supplied remote control to control play (if it supports AVRCP).

 To pause/resume play, press the button on the remote control or

on the unit.

 To skip to a track, press the / buttons on the remote control.

USB

USB Operation

1. Insert the USB device.

2. Press the button repeatedly on the unit or press the button on

the remote control to select USB mode.

3. During playback:

 To pause or resume play, press the button on the remote control or

on the unit.

 To skip to the previous/next  le, press the / buttons on the

remote control.

TIPS:

• USB devices up to 32GB are supported.

• Only MP3  les can be played back.

Troubleshooting

No power

• Ensure that the AC cord of the soundbar and subwoofer are correctl

connected.

• Ensure that there is power at the AC outlet.

• Press (standby) button to turn the unit on.

Remote control does not work

• Before you press any playback control button,  rst select the correct

source.

• Reduce the distance between the remote control and the unit.

• Insert the battery with its polarities (+/-) aligned as indicated.

• Replace the battery.

• Aim the remote control directly at the sensor on the front of the unit.

No sound

• Make sure that the unit is not muted. Press MUTE or VOL+/VOL– button

to resume normal listening.

• Press button on the unit or on the remote control to switch the soundbar

to standby mode. Then press the button again to switch the soundbar

on.

• Unplug both the soundbar and the subwoofer from the mains socket,

then plug them again. Switch on the soundbar.

• Ensure the audio setting of the input source (e.g. TV, game console, DVD

player, etc.) is set to PCM or Dolby Digital mode while using digital (e.g.

HDMI, OPTICAL, COAXIAL) connection.

• The subwoofer is out of range, please move the subwoofer closer to the

soundbar. Make sure the subwoofer is within 5 m of the soundbar (the

closer the better).

• The soundbar may have lost connection with the subwoofer. Re-pair

the units by following the steps on the section “Pairing the Wireless

Subwoofer with the Soundbar”.

• The unit may not be able to decode all digital audio formats from the

input source. In this case, the unit will mute. This is NOT a defect.device

is not muted.

TV has display problem while viewing HDR content from HDMI source.

• Some 4K HDR TVs require the HDMI input or picture settings to be set for

HDR content reception. For further setup details on HDR display, please

refer to the instruction manual of your TV.

I can’t  nd the Bluetooth name of this unit on my Bluetooth device for

Bluetooth pairing

• Ensure the Bluetooth function is activated on your Bluetooth device.

• Ensure you have paired the unit with your Bluetooth device.

This is a 15 mins power oﬀ function (ERPII standard requirement for

saving power)

• When the unit's external input signal level is too low, the unit will be

turned o automatically in 15 minutes. Please increase the volume level

of your external device.

The subwoofer is idle or the indicator of subwoofer does not light up.

• Please unplug power cord from the mains sockect, and plug it in again

after 4 minutes to resent the subwoofer.

Sharp HT-SBW460 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info