Bedienungsanleitung Sharp K-60V19BQM (Seite 16 von 116) (Deutsch, Englisch, Dänisch)

786023

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

EN - 14

Adjusting the Cooking

Duration Time:

This function is used to cook in the desired

time range. The foods to be cooked are

put into the oven. The oven is adjusted

to the desired cooking function. The oven

temperature is adjusted to the desired

degree depending on the dish to be

cooked. Touch on the “M” sensor until

you see Duration time symbol “ |>| ” on

the timer display screen. “AUTO” appear

on the display. Adjusted the cooking period

for the food you wish to cook, by using the

Timer Plus and minus sensor while the

timer is in this position. Some time after

the adjustment operation is completed,

the day’s time will appear on the screen

and the Duration time symbol will begin

to continuously light on the screen.

At the completion of the set duration,

the timer will stop the oven and give

an audible warning. Also, “AUTO” will

begin to ash on the screen. Touching

any sensor of the control unit will end

the audible warning. “AUTO” will go on

to ash. Touch “ - “ and “ + “ symbols at

the same time to nish “AUTO” mode.

Adjusting the Cooking End Time:

This function is used to cook after a certain

period of time, within certain duration.

The food to be cooked is put into the

oven. The oven is adjusted to the desired

cooking function. The oven temperature is

adjusted to the desired degree depending

on the dish to be cooked.

Touch on the “M” sensor until you see

Duration time symbol “ |>| ” on the timer

display screen. “AUTO” appear on the

display. Adjusted the cooking period for

the food you wish to cook, by using the

Timer Plus and minus sensor while the

timer is in this position.Then touch the

“M” sensor until you see “ >| ” symbol.

the day time will begin to ash, with the

addition of the cooking period. Adjust the

nishing time for the food by using the

Timer Plus and minus sensor while the

timer is in this position. Some time after

the adjustment operation is completed,

the day time will appear on the screen and

the “ >| ” symbol will begin to continuously

light on the screen. The oven will start

operating at the time calculated by

deducting the cooking period from the

set finishing time, and will stop at the

set nishing time. The timer will give an

audible warning and “AUTO” will begin

to ash on the screen will begin to ash.

Touching any button of the timer will end

the audible warning. “AUTO” will go on

to ash. Touch “ - “ and “ + “ symbols at

the same time to nish “AUTO” mode.

Digital Timer Sound Adjustment:

Touch “-“ sensor until you hear sound.

timer will give an audible signal beep. After

that each time “-“ sensor is touched, timer

will give three different types of signal

beep. Do not touch any further sensor

and timer will save the last selected signal

type.

Key Lock Function

The key lock function is used to prevent

operating any functions of the control

unit by mistake. Touch “+” sensor until

you see key lock symbol on the display

to activate key lock. Touch the “+” sensor

to deactivate key lock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp K-60V19BQM Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp K-60V19BQM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info