770386
28
Zoom out
Zoom in
Vorherige Seite
1/110
Nächste Seite
EN -19-
sappears on the screen.
Adjusting the Cooking Duration Time:
This function is used to cook in the desi-
red time range. The foods to be cooked
are put into the oven. The oven is ad-
justed to the desired cooking function.
The oven temperature is adjusted to the
desired degree depending on the dish
to be cooked. Touch on the “M” sensor
until you see Duration time symbol “ |>|
” on the timer display screen. “AUTO”
appear on the display. Adjusted the co-
oking period for the food you wish to
cook, by using the Timer Plus and mi-
nus sensor while the timer is in this po-
sition. Some time after the adjustment
operation is completed, the day’s time
will appear on the screen and the Dura-
tion time symbol will begin to continuo-
usly light on the screen.
At the completion of the set duration,
the timer will stop the oven and give
an audible warning. Also, “AUTO” will
begin to ash on the screen. Touching
any sensor of the control unit will end
the audible warning. “AUTO” will go on
to ash. Touch “ - “ and “ + “ symbols at
the same time to nish “AUTO” mode.
Adjusting the Cooking End Time:
This function is used to cook after a cer-
tain period of time, within certain durati-
on. The food to be cooked is put into the
oven. The oven is adjusted to the desi-
red cooking function. The oven tempe-
rature is adjusted to the desired degree
depending on the dish to be cooked.
Touch on the “M” sensor until you see
Duration time symbol “ |>| ” on the timer
display screen. “AUTO” appear on the
display. Adjusted the cooking period for
the food you wish to cook, by using the
Timer Plus and minus sensor while the
timer is in this position.Then touch the
“M” sensor until you see “ >| ” symbol.
the day time will begin to ash, with the
addition of the cooking period. Adjust
the nishing time for the food by using
the Timer Plus and minus sensor while
the timer is in this position. Some time
after the adjustment operation is comp-
leted, the day time will appear on the
screen and the “ >| ” symbol will begin
to continuously light on the screen. The
oven will start operating at the time cal-
culated by deducting the cooking period
from the set nishing time, and will stop
at the set nishing time. The timer will
give an audible warning and “AUTO”
will begin to ash on the screen will
begin to ash. Touching any button of
the timer will end the audible warning.
“AUTO” will go on to ash. Touch -
and “ + “ symbols at the same time to
nish “AUTO” mode.
Digital Timer Sound Adjustment:
Touch “-“ sensor until you hear sound.
timer will give an audible signal beep.
After that each time “-“ sensor is touc-
hed, timer will give three different types
of signal beep. Do not touch any further
sensor and timer will save the last se-
lected signal type.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp K-62V19IM1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info